wii

Is it possible to make a wii portable without using custom regulators? So i found out its hard to buy the custom regulators here in the Philippines and its expensive to buy outside the country. So is there a possible way to power it? Like the ps2 standard trim voltage relocation

Hey, the screen I am using for my trimmed Wii just has a composite input but I would love to have an HDMI output port on my console as well. In contrast, the Wii2HDMI adapter needs component output which I get if I would bridge the 3.3v and mode pins. Is it possible to get both output types at...

Hey, I recently trimmed my Wii and it still works without any issues. Now I wanted to connect the two USB ports from the Wii but I can't get them to work. Here are some pictures of my work: The magnet wires are twisted, I checked the connections with a multimeter and the 5V (blue) and...

ey b0is So I bought this screen (https://www.buydisplay.com/default/4-3-inch-800x480-tft-lcd-display-with-hdmi-vga-video-av-driver-board). It works to some degree. when there's no signal the backlight is fine. the buttons work, etc. But when I plug in a VGA source (my PC), the screen goes dark...

Hi, before trimming my console, I wanted to make sure my custom regulators are working fine. These are my readings from the four regulators (PTH08080WAH): size of resistor used - output voltage reading from multimeter 82k - 0,995 V 33k -...

Hello guys, I am currently planning on building my first Wii portable with a MB trim. After hours of research in the forums I began to make a list of parts to buy. I don't want to waste money by buying parts that won't work toghether, therefore I wanted to ask a couple questions before buying...

Original thread here: https://bitbuilt.net/forums/index.php?threads/noob-cube-mini-gamecube-for-first-timers.2845/ Files here: https://www.thingiverse.com/thing:3775435

Hi guys and gals, is there any potential way to slim down a wiiu mainboard? I have quite a good project in mind but I don't trust myself to slim a board (tried with a Wii once, got close but killed it in the end lol) Id imagine the biggest issue is the lack of proper software such as...

So this is my first Wii trim and case design. I figured i'd start out with a rather simple mod before moving on to a portable. THE GOAL: To create a case that is simple to print and assemble. To reuse a decent amount of Wii components and screws. Small enough to be cute but retain...

THESE FILES ARE OLD BAD AND DUMB CLICK HERE TO SEE THE UPDATED FILES THAT YOU SHOULD ACTUALLY USE NOW I've decided to go ahead and release the Louii's CAD files and a rough BOM for anyone who would like to build their own. I've included both the STLs and the Inventor .ipt files so that you can...

I've decided to make a laptop portable Wii without a trim but have a couple of question. First question is which battery supply should I use. I've seen a AA x 8 battery holder on Amazon. SMAKN 8pcs battery AA 12v clip holder. - Amazon choice. Would this power a Wii? If so for how long...

This is probably a question already covered somewhere before, but for the life of me I couldn't find it. Does anyone know how to power on / off the wii without the usage of the contact points. Same for the syncing. I have a wii board with burnt out buttons and damaged contact points, but I still...

This is the Louii The goal was to capture the beauty and grace of Louie from the Pikmin series, but unfortunately I completely overshot. Features: Beautiful custom molded Switch buttons and joysticks. If you aren't using Madmorda buttons in a portable in 2019 then you'd better be molding...

I have looked over the forums thoroughly, and I'm pretty sure this is what I need. I just want to make sure, just in case. Thanks in advance.

I’m not too entirely sure what I’m going to be doing for this Contest, most likely a portable, and wii. This first worklog will be for me going through Idea’s, and what’s done. So far I haven’t gotten too far in anything, I have a couple of Case Idea’s, I have this one, Pretty much done, The...

or should I call it the Wii GamePad Portable? Wii Portable GamePad? Names are hard. Anyways I've finally decided to build my first Wii portable and I figured I might as well enter the contest. The idea should be nice and simple. Making a Wii portable in a Wii U GamePad. I always thought it...

OH BABY IT'S TIME After the original WaluWiigi took the 2017 contest by storm and generated a whopping 3 votes overall, I've decided to duplicate that success with a successor. The WaluWiigi 2.0 is going to take everything I've learned from my past two years in the portbalizing community and...

Hey guys, after a lot of tinkering over time and rigorous research, im taking a crack at portables... ive done some shady things in the past like putting a screen in a wii (failed first project lol) and recently i stuck a screen in a ps2 cuz i was bored ... right now ive just been drawing up...

Over the past 6 or so months, I've put in a lot of time with the original Waker of the Wiind and have been really pleased with how it runs. That being said, it's certainly not perfect, and so since I've got some parts laying around that could use a home I figure I'll revamp the case and tweak...

So while I wait for my soldering heat gun to work(waiting for a replacement that works .-. ), and since I'm out of money, I decided to give my idle hands work, and I took a shot at Frankencasing. It sucks, But It's finally done the case work for the most part(just need to make port holes). I'm...