wii

I want to build a wii portable and want to use 3ds analog sticks. Do I just use the caps? Or do I somehow replace the analog stick on the gamecube with it. If yes, how do I do it?

Hello Ladies and Gentlemen, *EDIT* - My bored dumb ass was going through the rules and noticed: 4. Don't Post Other User's Work Without Permission I do apologize in advance for anybody who didn't want their content linked here, please let me know if you do not want it here, and I will take it...

I don't know which power distribution boards to use for a portable wii. Will one from a gamecube work? If not what are some good PMS boards to use?

I bought a Wii a couple of years ago, and I installed PortablizeMii. Can I sell it with the software? Edit: Just googled it. I can't sell it with games on it.

Sounds like a dumb question. "Just follow the trimming guide. Stick with what works". I'm kinda just curious though, would it be feasible to make a portable with the full-size Wii board inside? It's not *that* huge, so if I didn't care about the size of the portable too much, would this be an...

Also, is there a way to trim the Wii disc drive smaller and relocate it once the wii motherboard is trimmed?

Hello, I'm new to making portables and would like to make a portable gamecube (Using a Wii motherboard). I plan to use the SD slot for the wii to load games, but i also want the satisfaction and option of inserting a real gamecube disc. Is it possible for me to connect a gamecube disc drive to a...

There's a couple things about the Wii and Portablize Mii I just can't seem to find. Is there any, way, shape, or form of Bluetooth I can get in any way on the Wii for things like controllers, headphones etc. If you relocate the Wifi module and you enable Wifi on Portablize Mii will you be able...

Hi, I was wondering what the best way to implement clicky sticks (the analog stick that send an input when you press them down) on a wii nunchuck is. What I know so far is that the Wii nunchuck connector has extra pins. I was thinking, if I replaced the nunchuck analouge stick with a spare...

hi all, I'm specifically wanting to create a small form-factor wii like the wii micros done here before. The purpose is to run only Super Smash Bros. Melee (Slippi) for tournaments. Eventually i might create a comprehensive guide and or videos to help others to do the same. Wiis are a pain to...

first thanks to all who contribute and gave the bases to be able to make this type of project; I decided to do this worklog based on all the comments of the BuitBuild mentors, but in my country I am not able to find all the bitstore accessories, or they are very expensive for me, so I...

I started work on my first portable a few weeks ago and one dead board later I finally have a setup that boots to portabilize-me post-trim. Currently using 4x pth08080wad regulators to power the system and I've left the AV socket on for now to help with testing. I do have an RVL PMS coming so I...

Hello! I've been looking for a console modder to comission for a custom console. The vague concept: Basically a trimmed Wii + trimmed N64. Why: The Wii can run most older consoles well with emulation, however the N64 emulation is still struggling. Considering that me and my friends still play...

Heyo, I was wonder what the deal is with Bluetooth relocation, as I would like to play Wii games on my first portable. But the Bluetooth relocation seems redundant if you could hypothetically insert a USB Bluetooth adapter and connect a Wii remote? Same goes for wifi... The only reason I don't...

Hey folks! I've spent a lot of time reading all of the guides/material/videos and I think I'm ready to get started! My current BOM is looking something like: Buy from BB: Audio Amp, PMS, Dual Tacts, GC+ Buy From other: 5" Screen, Speakers, Headphone Jack, Power Jack, Fan, Heatsink, Switch...

So, a while ago I've decided to make a portable wii, I'm naming it the Portiblii! and I need help with its internals. I'm going to order some 18650 3-6Ah batteries wired in 4P (with internal protection because safety first), a 5" AV display, boost converter and buck converters for the power...

Hi, I'm going to try to design my case before my parts come in but I can't find the dimensions of a trimmed (or untrimmed for that matter) Wii motherboard. Please help.

I know I've asked quite a bit of questions however, I was wondering about how much power a portable Wii would consume with a 5 inch (diagonally) screen with everything else usually in a portable like a Wii and fan etc.

I have desoldered U9 (after my attempts at desoldering U10 were unsuccessful), but one of the legs broke off (on the side with two legs). Is it worth trying to solder to the point where the leg broke off from, or should I move on to taking the U10 off another Wii motherboard? Basically - Is a...

There are two pads across from each other (for resistors) with the label R2R9 - the rest of the pads are labeled R1-R16 (except R2 and R9). My question is: do I solder both R2 and R9 to those pads? What does it mean?