Question Noob, power input or output question.

Discussion in 'Wii' started by Nicholas298, Oct 22, 2019.

  1. Nicholas298 .

    Joined:
    Sep 8, 2019
    Messages:
    45
    Likes Received:
    24
    Location:
    Louisiana
    Portables:
    0
    I've been trying my best to understand everything on the trimming guide before going too hands on, I successfully relocated the U10 chip. Now the only question I have is if the 5v, 3.3v, and 12v locations are outputs or need to be supplied with the voltage to the pins 4, 10, and 13?
    [​IMG]
     
  2. medic3k .

    Joined:
    Oct 9, 2019
    Messages:
    22
    Likes Received:
    4
    those would be outputs from the regulators to the Audio/video adapter, using this part of the guide would allow you to still use the audio/video output plug on a trimmed board. if you are portablizing, you wouldnt need to connect to this port, instead wiring the Video and audio signals to your LCD and Audio Amp+speakers
     
    Nicholas298 likes this.
  3. Nicholas298 .

    Joined:
    Sep 8, 2019
    Messages:
    45
    Likes Received:
    24
    Location:
    Louisiana
    Portables:
    0
    Also if anyone can answer this, can I use 34 gauge magnet wire on the connection from the U10 to the GPU pin?
     
  4. Gman RTFDS Staff Member . . . . .

    Joined:
    Feb 25, 2016
    Messages:
    889
    Likes Received:
    1,946
    Yes
     
    Nicholas298 likes this.

Share This Page

Loading...