wii

BOM: It's pretty straight forward - - 4 Layer Wii - Red board USB A x2 - RVL-PSU x 1 - NAND Flex x1 - PTH or any other regulator for 1.8v - Gamecube controller extension lead x4 (for adapter) - A latching power switch (There's a bit of room to use whatever you can fit) - A 35x35x10 fan and...

After only 17 days[!] development & build time, my GCii Pocket is finally finished! So this are the planed final specs: - Near OMEGA Trimmed Wii [NAND & AVE Relocation] - 3.5" IPS LCD using tasty VGA - 1s2p 18650 via RVL PMS - little over 2h battery life - Audio via crippled but WiiHUD...

IT IS TIME - Digitally frankencased (coined by @Shank ) using 3D scans and a shitload of meshwork. - 3D printable. - Coming December 2020 maybe A lot of testing is still underway but I'll keep you all updated

Story time: I trimmed the board, relocated U10, and connected voltages to the board from the PMS. The board booted, to my delight. But then, disaster struck. I was considering removing the LDO to save some room in my case, and so I was probing with my multimeter to find where the 1.8 V output...

Hey y'all, I'm currently working on my Wii portable. There's several sensitive solder joints on the main Wii motherboard. These include AWG 38 magnet wire soldered to tiny AVE pins, as well as that *one* via that you can solder the U10 wire to. Anyone know how to make sure those wires never come...

Hi folks, today i'm happy to finally present to you my Wii Micro aka "Miicro" Project! About this project The goal of this project was to use as less additional components as possible and make most of them 3d printable. Also it recycles a lot of the Wii's mainboard and used the stock...

I am planning to make a Wii portable based off of the Nintendo Switch Lite's design. I'm going to balance aesthetic and functionality. I don't know if docking will be implemented. Here is my concept drawing (blurry finger included!): (The one on the left) I've already found an RVL-CPU-40 on...

Hi guys. Unfortunately I'm not getting any video out on my untrimmed Wii. I'm trying to do Aurelio's VGA mod. I enabled it in BBLoader already. I'm using AWG 38 magnet write for some of the lines due to having to solder to vias, and AWG 30 for soldering to pins. My Wii turns on all right...

I've been looking to get back into the portable wii world again, and after my first failed attempt a few months ago, I've taken time to learn about the basics of electricity, the parts that use it, and how things work. I'm still no where even close to perfect, nobody is, I'm only 15. But I'm...

I'm a little late to start my worklog, but I hope to actually finish my entry this year! I'm building something I've been wanting to build for a long time: a Gameboy Advance shaped Wii portable. My main idea here is to try and keep both the size and the shape accurate to the original GBA without...

For those of you who haven't heard, there was a recent leak of some Nintendo stuff that apparently includes everything from N64 tech demos to the very source code of the Wii itself. If you search "Nintendo Leak," you'll be bombarded with news stories about it. Reportedly, the ~3GB of info that...

This is my worklog for my wii portable build project. I just placed an order for all my tools. So far, I have the 7 or 8" screen, driver board, hdmi splitter and hdmi adapter (i know, bad for power but as its my first time, ill give it a whirl), 6 layer wii (going to search for a 4 layer this...

GC+ and dual tact mod - bitbuilt store Mini PAM8803 audio amp board - here I want to be able to somehow use a poteniometer on the amp board (Any guides on this?), this is what I want to use - GBA 5-pin potentiometer WiiU gamepad speakers - here 4-pin headphone jacks - here. Should I use 3-pin...

Background Wii laptops were popular among early modders and beginners, like myself, but all attempts I've perused were incomplete, dated, or were not portable (i.e. tethered to wall power). I don’t stand a chance against this year's unique ideas and skilled modders, but I hope to take the title...

Hello. When looking at the trimming guide, there are multiple things highlighted with the same color. Does this mean the wire can be attached anywhere highlighted in the color, or just a specific location? Thank you!

Hello, community. I have begun preparing my RVL-CPU-01 Wii motherboard for relocation and trimming, but I cannot find video/photo documentation showing what a successful 6-layer OM6 trim and Bluetooth/U10 relocation should look like. I've checked out both 'The Definitive Wii Trimming Guide' as...

Cheese Installer will not recognize my USB. Its a 32gb flash drive, which has been formatted to FAT32 with 32kb allocation size. All appropriate files have been copied over, and it's been put into the proper USB port on the Wii. I still get the message every time "Patching Running IOS; IOS...

1. Any good guide on making analog shoulder button presses? 2. My order is still awaiting fulfillment, but I want to add more stuff. Can I add it to my current order so I won't have to pay for shipping twice? 3. Does portablizemii replace the wii menu? Or can i go back to the wii menu if I want...

Can i use wii U or 3ds speakers? Will any speaker work? will any audio amp board work?