- Joined
- Feb 23, 2019
- Messages
- 18
- Likes
- 15
Hello everybody
I apologize for my bad English
This is my first project of a portable wii.
I was undecided whether to call it wiiasy or simplywii, in the end I chose wiiasy.
Wiiasy because it is a project born to be as simple and easy as possible.
Starting from the design of the case which is very simple.


I tried to avoid screws, it fits perfectly, even if I have to study a more secure external fixing system, I thought to do it with staples, but I'll think about it later.
The choice of components was also made to simplify the project.
Battery charger for 18650 I used this::
https://www.amazon.it/gp/product/B07GKWBG3J/ref=ppx_yo_dt_b_asin_image_o02_s00?ie=UTF8&psc=1
One touch to turn on and two to turn off, this charger also has a LED that is activated by holding down the button for 10 seconds, which I would like to use for the sensor bar.
it is still in the testing phase but so far it has not given any problems
6.2 inch vga display
https://it.aliexpress.com/item/33018398993.html?spm=a2g0s.9042311.0.0.7a684c4dOl3N9F
For me 7 "too big and 5" too small.
Usb a sd kingston
https://www.amazon.it/gp/product/B0028R3NCU/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
The heatsink taken from an old motherboard,
fan and speakers from a netbook.
For the analogs I chose those of the classic controller for wii
I printed the rest of the buttons.

I have a compatible gamecube controller but it gives me a lot of problems, so I'm looking for an original one at acceptable prices.
I would also like to add a wavebird receiver for the second player.
Now I'm trying to make the VGA mod work which for some reason doesn't want to work.
I will certainly forget something but I will update it later
Thanks to all the bitbuilt community you are fantastic
a special greeting to Aurelio
I apologize for my bad English
This is my first project of a portable wii.
I was undecided whether to call it wiiasy or simplywii, in the end I chose wiiasy.
Wiiasy because it is a project born to be as simple and easy as possible.
Starting from the design of the case which is very simple.


I tried to avoid screws, it fits perfectly, even if I have to study a more secure external fixing system, I thought to do it with staples, but I'll think about it later.
The choice of components was also made to simplify the project.
Battery charger for 18650 I used this::
https://www.amazon.it/gp/product/B07GKWBG3J/ref=ppx_yo_dt_b_asin_image_o02_s00?ie=UTF8&psc=1
One touch to turn on and two to turn off, this charger also has a LED that is activated by holding down the button for 10 seconds, which I would like to use for the sensor bar.
it is still in the testing phase but so far it has not given any problems
6.2 inch vga display
https://it.aliexpress.com/item/33018398993.html?spm=a2g0s.9042311.0.0.7a684c4dOl3N9F
For me 7 "too big and 5" too small.
Usb a sd kingston
https://www.amazon.it/gp/product/B0028R3NCU/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
The heatsink taken from an old motherboard,
fan and speakers from a netbook.
For the analogs I chose those of the classic controller for wii
I printed the rest of the buttons.

I have a compatible gamecube controller but it gives me a lot of problems, so I'm looking for an original one at acceptable prices.
I would also like to add a wavebird receiver for the second player.
Now I'm trying to make the VGA mod work which for some reason doesn't want to work.
I will certainly forget something but I will update it later
Thanks to all the bitbuilt community you are fantastic
a special greeting to Aurelio
Attachments
-
3.1 MB Views: 403
-
3.1 MB Views: 844
-
3.2 MB Views: 715
-
3.1 MB Views: 731
Last edited: