Question (Noob Question)Wii portable without custom regulators?

Joined
Oct 6, 2019
Messages
8
Likes
0
Is it possible to make a wii portable without using custom regulators?
So i found out its hard to buy the custom regulators here in the Philippines and its expensive to buy outside the country. So is there a possible way to power it? Like the ps2 standard trim voltage relocation
 
Last edited:

xsping

.
Joined
Dec 9, 2018
Messages
154
Likes
50
you can use the full mother board if you want to use screen more than 10”.
 

Stitches

2 and a Half Dollarydoos
Staff member
.
.
Joined
Feb 5, 2017
Messages
3,776
Likes
2,982
Location
Banana Bender Land, Australia
Portables
6
so i cant build it with 7.4volt battery and 5 inch screen
No, you can't use a 7.4v battery with an untrimmed Wii. The minimum input voltage is just over 10 volts, so you have to use a 14.8v battery pack instead. You can use a 5 inch screen, it'll just be a bit small in relation to the rest of the case.
 
Joined
Oct 6, 2019
Messages
8
Likes
0
No, you can't use a 7.4v battery with an untrimmed Wii. The minimum input voltage is just over 10 volts, so you have to use a 14.8v battery pack instead. You can use a 5 inch screen, it'll just be a bit small in relation to the rest of the case.
Ohh okok thank you
 
Top