wii

  1. Solved Viable Additional Trim?

    I've been putting together a G-Wii, but including a memory card slot. However, I recently discovered that I can't fit the memory card slot in with the Wii as I currently have it trimmed. The area marked in black sharpie is what I would need to trim off to fit the slot. From what I can tell, I...
  2. wiiplayer

    Question where can I get gamecube 2.0 board

    where can I get gamecube 2.0 board?
  3. TropicPug

    Question Wii VGA Resolution Issues

    Hi all, Been having issues with wiring up VGA to my portable. When VGA is enabled, the image is dramatically too small horizontally, and looks incredibly squished. 480i signal over AV becomes extremely shaky, awful and really hurts the eyes. I haven't messed around with any of the LCD board...
  4. Worklog My first wii portable

    So, this is my first wii portable, and I want to document the entire progress. I've relocated the u10 and bluetooth, and in a couple of hours, the dremel I ordered should arrive. I also ordered 4 PTH08080's from China, I should only need 3 though because I am planning to use a powerbank circuit...
  5. Can a 7" TFT LCD be connected to the Wii?

    I see that the screen interface has UART and Ethernet ports. Here is the datasheet.
  6. Question Switching from BBloader to RVloader without a gamecube controller

    So I have bbloader installed on my Wii, and I want to switch to RVloader, but I don't have a gamecube controller. Also, I lost the usb I installed bbloader on so I most likely need a new one. What is the procedure I need to follow?
  7. SparkleBear

    Worklog Black Beautii -- SparkleBear's G-Wii Rev 2 Worklog. :)

    Hey y'all... I finally got started on my Gwii build today. I still don't have all the parts from AliExpress but I couldn't hold back any longer. I've had so much fun building and dialing in my first portable, a purple Gboy, that I am already excited to make a second portable. Its been so...
  8. Crimson_Thunder

    Worklog My first wii portable. Welcoming name ideas, haha.

    Figured I'd at least get something with the basics working before i started a work log. Started off with u10 relocation after installing rvloader. After confirming it booted. Removed the u10 wire to ensure I didnt just rip it off and take the trace with it when trimming the board. Removed all...
  9. Crimson_Thunder

    Question Need some help with my first portable wii

    So before I waste anyones time by writing a whole speech for someone to ask, I'm using(attempting to use I think is the right word here?) Mp1584 EN module boards for my power supply. Anyone had luck with these? On my third motherboard(starting to run out of wiis with dre's to buy locally...
  10. Kayantao

    Question Questions regarding the G-Boy

    Hey im really new here and this has potentially been asked, but i couldn't find all the answers while seeking so i will just go ahead with this. (should there be an issue with me doing so, feel free to remove the thread) I only recently discovered the whole idea of actually modding consoles...
  11. vipe_202

    Wiide-boy portable, inspired from G-Boy

    Continuing with my theme of fitting a portable into my 180mm build volume printer comes another portrait handheld my Wiide-boy. Coming in at 512 grams 115mm wide 155 tall 34mm thick and 54°C underload it is a solid piece of fun. Unmodified Rear Plate The aim for this portable was...
  12. Joe crump

    Discussion My New Design

    I have spent an hour or so making this and I would like to show it off. What do you guys think?
  13. JCasper

    Question Wii Portable Battery/General Parts

    Hey all! I'm very new to modding and only have some basic electronics experience. I am working on gathering parts for my Wii portable build. I did have a PSOne screen that I was going to use for this project, but it doesn't work. I recently picked up a portable DVD player at the thrift store...
  14. JCasper

    Question General parts questions and battery

    Hey all! I'm very new to modding and only have some basic electronics experience. I am working on gathering parts for my Wii portable build. I did have a PSOne screen that I was going to use for this project, but it doesn't work. I recently picked up a portable DVD player at the thrift store...
  15. Question Looking for screens for a wii portable

    I can't seem to find a good screen on the internet, the best I found was this but it doesn't have a VGA input, and I am not sure how good Wii games will look on that low resolution. Then there is this which also has those problems. I am going for something like 3.5 inches. Any recommendations?
  16. IhYpGc

    Guide 6 layer Wifi and SD relocation points

    As I'm a newbie with trimming in general I though it be best to research and get a good grasp on the soldering/relocation points. Seeing as I couldn't find any easily find any posts on relocation points for 6 layer Wi-Fi, I stared at my board until I found some (I did continuity tests of...
  17. cy

    Mario Themes For RVLoader

    With a bit of work I've put together some new themes for RVLoader! I decided to make some Mario themes this time as I think more people will enjoy these. I've currently only made 5 Super Mario Galaxy themes(again reusing assets once the base ones were created) but I plan to make/release more...
  18. cy

    Anime themes for RVLoader

    Recently I've gotten to work on making themes for RVLoader, with help from @Aurelio of course! The first idea I had for a theme was a Steins;Gate theme. I have other Nintendo related themes that are coming - but hopefully for now, this will quench the thirst people seem to have for custom...
  19. Gi0V1Z

    Worklog The DWii

    Hello BitBuilt!!! This is my fist project, the DWii, it will have: -7” TFT display (wired with VGA) -Bluetooth -Wi-Fi -MX chip -PMSv2-lite -USB-C PD PCB -U-AMP -GC+ 2.0 -2x LRA vibration motors 2V -4x INR18650-35E 3500mAh 10A 1-35W I had troubles with my first trim, so I asked for help in the...
  20. Moustique

    Worklog My First Portable Wii

    Hello everybody, My name is Romain and i'm from France, I found a lot of information about the portable Wii on this forum and some Tuto. Then I decide to create one for myself, because I'm a big fan of Nintendo. I make a lot of research and I finally decide to buy everything. First of all I...
Top