Question Can you guys check my materials for making a wii portable?

Joined
Apr 8, 2020
Messages
98
Likes
6
GC+ and dual tact mod - bitbuilt store
Mini PAM8803 audio amp board - here
I want to be able to somehow use a poteniometer on the amp board (Any guides on this?), this is what I want to use - GBA 5-pin potentiometer
WiiU gamepad speakers - here
4-pin headphone jacks - here. Should I use 3-pin? Any guides on adding headphone jacks?
2 9900 mAh 18650 batteries - here
If those are dangerous can I use these? They're 3200 mAh
mini usb 18650 chaging protection board - here
18650 battery holders - here
SD card and USB
3.5" VGA screen - here
Buttons - https://www.adafruit.com/product/3101
Joysticks - 3ds joysticks
RVL-PMS - Can I copy the design from the bitbuilt store on kiCad and print it? Will it work?
On/Off switch. I want to use this instead of a tact switch - here
I feel like there's something I'm missing, I don't know what.
All tools I already have.
 

Wesk

Undervolting....
Staff member
.
.
Joined
Jul 12, 2017
Messages
890
Likes
2,247
Location
Queensland, Australia
I don't believe that audio amp supports a volume pot and you won't need a charging protection board if you're using the RVL-PMS as that has one built in (Check specs on the BB store page).
 
Joined
Apr 8, 2020
Messages
98
Likes
6
I don't believe that audio amp supports a volume pot and you won't need a charging protection board if you're using the RVL-PMS as that has one built in (Check specs on the BB store page).
Can I use that charging protection board to charge the batteries?
Also, does it matter which model I use for my batteries? Can I use NCR18650BD batteries?
 
Last edited:

Wesk

Undervolting....
Staff member
.
.
Joined
Jul 12, 2017
Messages
890
Likes
2,247
Location
Queensland, Australia
Top