portable

After only 17 days[!] development & build time, my GCii Pocket is finally finished! So this are the planed final specs: - Near OMEGA Trimmed Wii [NAND & AVE Relocation] - 3.5" IPS LCD using tasty VGA - 1s2p 18650 via RVL PMS - little over 2h battery life - Audio via crippled but WiiHUD...

IT IS TIME - Digitally frankencased (coined by @Shank ) using 3D scans and a shitload of meshwork. - 3D printable. - Coming December 2020 maybe A lot of testing is still underway but I'll keep you all updated

Hey y'all, I'm currently working on my Wii portable. There's several sensitive solder joints on the main Wii motherboard. These include AWG 38 magnet wire soldered to tiny AVE pins, as well as that *one* via that you can solder the U10 wire to. Anyone know how to make sure those wires never come...

Features: USB-C port 3 18650 3600mAh batteries MX relocation Bluetooth relocation- due to planning before Hiidra Slider controller audio (thanks to StonedEdge) Second Z buttons for more mappings with GC2Wiimote Created this portable with a more comfortable form factor in mind, by emulating the...

I'm a little late to start my worklog, but I hope to actually finish my entry this year! I'm building something I've been wanting to build for a long time: a Gameboy Advance shaped Wii portable. My main idea here is to try and keep both the size and the shape accurate to the original GBA without...

Hi All, I have decided I really want to have a go at creating my own Portable PS2. Unfortunately I do not have too much electronics experience, I only know the basics really. I also know this is a massive task for someone with my knowledge but I love a challenge! Now, the problem is I don't...

Hey guys, this is going to be my first portable and I am super new and probably will end up hurting myself and the parts I use. My case will be made up of two different sides of a two screwdriver set cases (hence the name, ",Tool64"). I love the color of the green so if it doesn't work with the...

GC+ and dual tact mod - bitbuilt store Mini PAM8803 audio amp board - here I want to be able to somehow use a poteniometer on the amp board (Any guides on this?), this is what I want to use - GBA 5-pin potentiometer WiiU gamepad speakers - here 4-pin headphone jacks - here. Should I use 3-pin...

Uncertain what I'm going to title this project, so for now it's just a PS2 thing. I've never had a whole lot of drive to do a PS2 portable, just because I've never had any interest in the games for it. I bought a 79001 off of eBay shortly after Gman released the PS2 trimming guide, but it has...

Background Wii laptops were popular among early modders and beginners, like myself, but all attempts I've perused were incomplete, dated, or were not portable (i.e. tethered to wall power). I don’t stand a chance against this year's unique ideas and skilled modders, but I hope to take the title...

1. Any good guide on making analog shoulder button presses? 2. My order is still awaiting fulfillment, but I want to add more stuff. Can I add it to my current order so I won't have to pay for shipping twice? 3. Does portablizemii replace the wii menu? Or can i go back to the wii menu if I want...

Hello everyone, This is my first guide for this community. A small introduction into game loading methods of the ps2. There are 3 loading methods for the ps2: USB method. HDD method. SMB method. Usually, people opt to the USB method because of its simplicity, all you need to do is connect a...

Can i use wii U or 3ds speakers? Will any speaker work? will any audio amp board work?

I want to build a wii portable and want to use 3ds analog sticks. Do I just use the caps? Or do I somehow replace the analog stick on the gamecube with it. If yes, how do I do it?

Hello Ladies and Gentlemen, *EDIT* - My bored dumb ass was going through the rules and noticed: 4. Don't Post Other User's Work Without Permission I do apologize in advance for anybody who didn't want their content linked here, please let me know if you do not want it here, and I will take it...

I don't know which power distribution boards to use for a portable wii. Will one from a gamecube work? If not what are some good PMS boards to use?

Also, is there a way to trim the Wii disc drive smaller and relocate it once the wii motherboard is trimmed?

(Sorry to remove all context from this thread but coming back to this forum, to put it simply... I'm embarrassed to leave such a stupid question up, especially with the backlash it got. Start fresh and all that).

Hello, I'm new to making portables and would like to make a portable gamecube (Using a Wii motherboard). I plan to use the SD slot for the wii to load games, but i also want the satisfaction and option of inserting a real gamecube disc. Is it possible for me to connect a gamecube disc drive to a...

Well I finally trimmed and got a board to boot for an N64 so I figured might as well enter the competition and make a forum post. Specs: N64 with Expansion Pack 3.5" composite screen Horipad Retrobit remake controller Uamp Audio 3d Printed case(Transparent Ice Blue) This is a basic layout on...