portable

  1. Rubix3D

    Worklog Rubix's 1st Portable

    Hey folks! I've spent a lot of time reading all of the guides/material/videos and I think I'm ready to get started! My current BOM is looking something like: Buy from BB: Audio Amp, PMS, Dual Tacts, GC+ Buy From other: 5" Screen, Speakers, Headphone Jack, Power Jack, Fan, Heatsink, Switch...
  2. Solved Battery life quote

    I know I've asked quite a bit of questions however, I was wondering about how much power a portable Wii would consume with a 5 inch (diagonally) screen with everything else usually in a portable like a Wii and fan etc.
  3. Worklog First Wii Portable

    Soon, from now to summer, I plan to build my Wii Portable. It will have a 4.3" av Screen, video out through HDMI (for compatibility), GameCube buttons/ L and R, 3ds sliders, Sterio speakers and 3.5mm jack (using UAmp), 4 GameCube controller inputs, USB C charging, USB A game data and more...
  4. Dango

    Worklog First Wii Portable: G-Wii

    I feel like it's about time I start a worklog, I've been putting it off for a bit. I've gotten almost all of the parts I need, i'm just missing the case and audio amp (sort of). I recently trimmed my Wii and relocated bluetooth/A10 (i'll attach photos) Theres a few things i'm unsure of, I...
  5. MomSpaghetti

    Solved PAM8803

    Hello everyone, I've been making a n64 portable lately and im in the stage of pre-trim, I have a problem of no audio. i made a picture using paint below, I'm using the PAM8803 mini Class D amp. with 2x 8Ohm speakers. Are my connections right? Or is it the fact that the 8Ohm speakers are...
  6. Timo43

    Question Noob here, looking for some forums that can get me started on wii portables.

    Hey! So I checked out the wii trimming guide and have a general idea of how to make a wii portable (looked at a work log) but some forums about the specifics of certain parts of the process (mainly wiring and where everything connects to) would be useful as I have very little electronic...
  7. MomSpaghetti

    Worklog PSXp (A playstation 1 portable)

    Hello everyone, I've been using bitbuild for a long time to familiarize myself with the modding scene, i made a couple of projects before using raspberry pi before but decided not to make a big deal out of it since it's fairly common. lately I've been working on a playstation one portable since...
  8. 4875425142

    Question (Noob Question)Wii portable without custom regulators?

    Is it possible to make a wii portable without using custom regulators? So i found out its hard to buy the custom regulators here in the Philippines and its expensive to buy outside the country. So is there a possible way to power it? Like the ps2 standard trim voltage relocation
  9. 4875425142

    Question Ps1 Classic portable?

    Is it possible to make a Ps1 portable with ps1 classic? -7.4volt battery with 2s bms (2pcs 3.7v 4000mah) -5" eyoyo screen -usb port to add games using bleamsync -ps1 classic controller -amplifier board -Battery Capacity Indicator Electricity Power LED Display Board
  10. Worklog First Wii Project

    I've been reading a lot of stuff on the site and lurking around a lot of the other worklogs of complete noobs like me while collecting parts and tweaking my design. But I've actually done some work on some things and I like feedback so, In the words of our favourite plumber, here we go... BOM...
  11. timestopMachinist

    Question battery questions

    I'm making a portable emulation machine with the pi 4, and im confused about power solutions. im using this screen with this controller board. I'm new to this, if you couldnt tell. I realize that it would be difficult to power both with one battery, so i dont mind using more than one. I was...
  12. Question Is it possible to slim a wiiu mainboard?

    Hi guys and gals, is there any potential way to slim down a wiiu mainboard? I have quite a good project in mind but I don't trust myself to slim a board (tried with a Wii once, got close but killed it in the end lol) Id imagine the biggest issue is the lack of proper software such as...
  13. Question GameCube Portable Guides?

    I’ve never done any hard modding, mostly soft modding and homebrew stuff. I want to make a portable out of my GameCube as, I would like to keep my Wii for home use. Does anyone have any guides for this, as well as an estimated cost, as I probably do not have all the equipment needed.
  14. GingerOfOz

    Model [OLD DO NOT USE THESE] Louii CAD Files

    THESE FILES ARE OLD BAD AND DUMB CLICK HERE TO SEE THE UPDATED FILES THAT YOU SHOULD ACTUALLY USE NOW I've decided to go ahead and release the Louii's CAD files and a rough BOM for anyone who would like to build their own. I've included both the STLs and the Inventor .ipt files so that you can...
  15. GingerOfOz

    The Louii

    This is the Louii The goal was to capture the beauty and grace of Louie from the Pikmin series, but unfortunately I completely overshot. Features: Beautiful custom molded Switch buttons and joysticks. If you aren't using Madmorda buttons in a portable in 2019 then you'd better be molding...
  16. NahuelFlores

    Question Is this battery scheme well structured?

    Hello! As you saw in the title, I need help with this battery scheme. I need you to confirm your is well structured. To consider; each battery of the following scheme will be in an individual battery compartment. The batteries will be charged with a specific battery charger, so you will have to...
  17. Morgan_The_Adventurer

    Wii GamePad

    or should I call it the Wii GamePad Portable? Wii Portable GamePad? Names are hard. Anyways I've finally decided to build my first Wii portable and I figured I might as well enter the contest. The idea should be nice and simple. Making a Wii portable in a Wii U GamePad. I always thought it...
  18. Legend

    Worklog *Question*chip sizes for case design

    Hey guys, after a lot of tinkering over time and rigorous research, im taking a crack at portables... ive done some shady things in the past like putting a screen in a wii (failed first project lol) and recently i stuck a screen in a ps2 cuz i was bored ... right now ive just been drawing up...
  19. GingerOfOz

    The Waker v2 - Louii Worklog

    Over the past 6 or so months, I've put in a lot of time with the original Waker of the Wiind and have been really pleased with how it runs. That being said, it's certainly not perfect, and so since I've got some parts laying around that could use a home I figure I'll revamp the case and tweak...
  20. Soulheaven

    Question HELP PROJECT PS2 PORTABLE MODEL 77004

    Hello everyone, given that this is my first PS2 portable project, I wanted to know some tips on how to do this at both the video level and the sound level. First of all, at the time I wanted to increase, and to decrease the volume using keys without a potentiometer, only keys I wanted to know...
Top