wii portable

  1. PoposPizza

    Question Does anybody know when RVL-PSU will be in stock again?

    Does anybody know when RVL-PSU will be in stock again?
  2. TropicPug

    Worklog Beginner Project - The Wii ToU

    Hi all, I’ve been looking into portablising for a long time and have finally decided to give it a shot! My plan is to fit a Wii portable into a Wii u gamepad with original buttons and the batteries to be stored externally with a 3D printed mount. I hope this worklog can be helpful more...
  3. BayCoder1

    Worklog Wavebiird portable reborn aka Project Phoeniix

    So this is yet another attempt at a wii portable. I always seem to get a nice looking case then flock up the electronics Big thanks to gman and shank for your files that finally made the idea of a wave bird with a screen easier to do. Btw I’ve been away from the scene for awhile so if there’s...
  4. Worklog First Ever Portable

    Hi, I’ve been looking into making a portable on and off for a few months now and I’ve decided to make a Wii portable. I plan on making a G-Wii, but including a GameCube memory card slot if at all possible. I think I've read through as much material as I can without making any actual progress...
  5. Skedaddlez

    Worklog The Sandwiich

    Hey guys! I figured I should start a worklog, mainly because I have a feeling it will help keep me motivated despite things going horribly wrong! And so begins the Sandwiich, named after its similar form factor to a Maxibon ice cream sandwich. Here is the feature list: OMGWTF Trim with MX...
  6. Want to buy Wii Portable

    Hello all, I've been interested in buying a Wii portable for quite awhile and I have the funds now to buy one. I looking to purchase one from the price range of $500-$750. I don't have any crazy requests but I do want the Mx chip relocated on the Wii motherboard just so I can play Animal...
  7. Worklog Magister's worklog - No Name Wii

    This is my worklog for my wii portable build project. I just placed an order for all my tools. So far, I have the 7 or 8" screen, driver board, hdmi splitter and hdmi adapter (i know, bad for power but as its my first time, ill give it a whirl), 6 layer wii (going to search for a 4 layer this...
  8. JoeyBag’ODonuts

    Worklog Copii Cat "Louii" Work Log

    So after months of lurking on here I decided it's about time to start a work log of some sorts. I first was interested in portabilizing consoles when I ran into ModdedbyBacteria's N64 portable way back in 2009. After all these years I decided to finally give it a shot but with a wii seeing as I...
  9. Aaron Miller

    Worklog Could someone take a look at my parts list?

    Thanks for everybody's help in editing my parts list. I think it's finally ready, and I can't wait to get started. All that's left is to get a little bit more money so that I can actually buy the stuff. https://1drv.ms/x/s!AmaALa0s8gZanlzL5dPSbFwH4nRm?e=ujlWaq
  10. Aaron Miller

    Question GC Joysticks

    From what I’ve been able to tell, in pretty much any Wii/GameCube portable, you’re going to have two joysticks: one main joystick and one c-stick. I was looking at the motherboard for a GameCube controller, and I saw that only the c-stick looked like it could be feasibly removed for use in my...
  11. Aaron Miller

    Need help with screen and video amp

    I am working on making a parts list for my first Wii portable, which I am thinking about calling the Shrink Mii. At the moment, I am looking for a screen and screen-related hardware, I kind of need a bit of help. I would like a 5-6 inch screen, and from what I’ve read I think I’m looking for a...
  12. ATmel91

    Discussion I'm making a Wii portable called the Poriblii, I need help

    So, a while ago I've decided to make a portable wii, I'm naming it the Portiblii! and I need help with its internals. I'm going to order some 18650 3-6Ah batteries wired in 4P (with internal protection because safety first), a 5" AV display, boost converter and buck converters for the power...
  13. Solved Best 3d Printing Software

    Hello, I'm 13 and never used 3d printing software. I'm looking for something free and accurate for my Wii Portable I know it's an ever changing world in 3d printing so l just had to ask which ones you guys would recommend.
  14. Solved Questions before Wii Portable

    I intend to make a Wii Portable after looking around the forums for a couple months for old work logs and Wii trimming guides. After going through these posts I have run into a few questions. First, I know that you need an audio amp to run speakers but do you need it to run a 3.5mm jack, I ask...
  15. SuperSaiyanBird

    Solved How expensive would a case be if this is the cost per gram?

    Hi there, I'm trying to figure out how expensive it would be to make the shell of my wii portable. My local library offers 3d printing services however they don't give an estimate for the price if you give them the dimensions. They do it by weight in grams. Although I don't know anything about...
  16. Worklog wiiasy

    Hello everybody I apologize for my bad English This is my first project of a portable wii. I was undecided whether to call it wiiasy or simplywii, in the end I chose wiiasy. Wiiasy because it is a project born to be as simple and easy as possible. Starting from the design of the case which is...
  17. Timo43

    Question Noob here, looking for some forums that can get me started on wii portables.

    Hey! So I checked out the wii trimming guide and have a general idea of how to make a wii portable (looked at a work log) but some forums about the specifics of certain parts of the process (mainly wiring and where everything connects to) would be useful as I have very little electronic...
  18. Morgan_The_Adventurer

    Wii GamePad

    or should I call it the Wii GamePad Portable? Wii Portable GamePad? Names are hard. Anyways I've finally decided to build my first Wii portable and I figured I might as well enter the contest. The idea should be nice and simple. Making a Wii portable in a Wii U GamePad. I always thought it...
  19. Question Wii portable parts list

    Tommy1981. I'm also new to building the wii portable. What all is needed to do a portable wii build? The gman power management, the gc +, a screen, 3d printed housing, and wii. Will this give me enough parts to make the portable wii. Does anyone think a portable dvd player screen would work in...
  20. Question First Portable - noob questions

    Hi! New here. Sorry for being so cliche with the title. So i want to start making a portable because it seems cool. I have experience soldering and with other electronics, but not much on this scale (i also need to buy a soldering iron of my own, so waiting on that.) Luckily, I have a 4 layer...
Top