ps2 portable

  1. cfc_12

    Eyoyo Screen auto ON and OFF using Electron Shepherd HDMI - Help!

    Need help to fix this The Component2HDMI and VGA2HDMI from Electron Shepherd actually works but the problem is, my screen auto turns ON and OFF almost every 3 seconds in an Eyoyo Motherboard as shown in the video. Do you have any ideas on how to fix this? Perhaps maybe a resistor, capacitor...
  2. cfc_12

    PS2P for Sale

    Hey guys! I have decided to sell a PS2p I have created. I was suppose to enter this for the 2021 BitBuilt contest, yet I have failed to finish it before the deadline. Well, I'm already done with it anyway and I'll just sell it to those who want :D Dimension: 13 x 13 x 4 cm Price: $300...
  3. Question Wires connection

    Hi I´m completely new to moding and electronics, but I got this idea of making my own PS2 portable cuz I don´t have 800 dollars to spare. But something bothers me: I am capable of doing everything myself, I got people who can help me, but how do I connect batteries to motherboard so it recognize...
  4. Mr.Jakes

    Question connection for ps2 board GH 061 51

    hello, a few days ago I started with my portable ps2 project, I used trimming guides without realizing that the version of my board is different, so some lines do not match when soldering the control and the memory card, any recommendations how to detect them or any other guide to follow? Thank...
  5. Daniel Ls81

    Worklog Ps2 shiden type-s

    Ps2 scph-79001 motherboard Hevy modified. 5v mod. Custom copper 2mm heatsink Custom 5v fan. Custom trim. Custom ethernet conector.
  6. Benge

    Release PS Vita Buttons 3D Files

    PS vita button are a nightmare :angry:to modelling and adjust to real dimensions. So here is mine, I hope it will help some people for designing their own PS2P ;) Be careful to make some test print before printing an entire case, the dimension have be taken by me and some can not be very...
  7. ABH

    PS2B

    Hi, this is my seconde PS2 build is finally done! Feature List: 5.5 hdmi to mipi screen 1080*1920 IPS Digital audio SD card for storage USB-C Charging 2x 18650 batteries Controlled backlight & audio through the dpad Headphone jack Auto boot ps2 no need for extra button 3d printed case in black...
  8. vipe_202

    PS2 Portable, like an oversized gameboy

    I'd like to finally present my first portable adventure, a PS2 portable with built in raspberry pi SMB loading. This has definitely been an adventure and learning curve, originally I aimed to go simple and do a standard trim but as I figured out how to model and print my portable shell it...
  9. Benge

    Worklog Benge BS2 Portable PS2

    Hello, after my first great experience in the portabilization of console (O-Wii), I really want to make a portable PS2 ! So here is my worklog :D Here are the ideas that I think to integrate : Custom buttons PCBs with PS2+ on it + RGB led, power button, L1 + R1 (and maybe U-Amp on one side)...
  10. Soulheaven

    Question Project and advice on a portable model scph 79004

    Good evening hi this is my first time that I design a portable ps2, to be premised that I want to make a portable ps2 on a model scph 79004 so that I can make a cut to the motherboard and make it smaller, for the moment for experiment I have a card ps2 obviously not the scph 79004 model to...
  11. Kells

    Question Micro Controller to control ps2

    I currently am working on improving my PlayStation 2 portable and I would like to be able to use a microcontroller instead of using a ps2 controller. I have a teensy 3.2 that I was hoping to use instead. Is there was any way to program this microcontroller to output what is needed to make a...
  12. darkwing

    PIS2 - PS2 portable with build in SMB server

    So it's finally time to post this project in this section I believe. It's been quite a while since I started this project and it kind of evolve over the years. From thinking of using DVD drive all the way back in 2013 to looking into obscure hard drive setup for the slim, experimenting with...
  13. NahuelFlores

    Question Can I charge three 18650 batteries with a 5v 1a charger?

    Hello! I'm in the middle of a PORTABLE PS2 project. This modification will use three 18650 batteries of 3.7 and 2200mAh to make 11.1v and then regulate it to 8.5v directly to the power port of the PS2. It should be noted that it is a SCPH-90010. I will charge the batteries with a 2.1mm jack...
  14. Soulheaven

    Question HELP PROJECT PS2 PORTABLE MODEL 77004

    Hello everyone, given that this is my first PS2 portable project, I wanted to know some tips on how to do this at both the video level and the sound level. First of all, at the time I wanted to increase, and to decrease the volume using keys without a potentiometer, only keys I wanted to know...
  15. Worklog My First PS2 Portable

    Hello everyone and welcome to my first ever work log! I am making my very first PS2 Portable and uploading my progress to YouTube and on this work log. I have most of my parts so far but am waiting for others. Special thanks to MRKane and Dominatory for helping me out in my question thread...
  16. Question I need help with making a PS2 Portable

    Hey I am new to this and I have been researching and looking around at articles and videos about PS2 Portables. I just need help choosing the best parts e.g. batteries and screen, and how to actually build it. My PS2 model is the SCHP-70002. I only have the PS2, a controller, and output cords to...
  17. Please Help all Modders!!!

    Hi, I am completely new and would like to make a portable ps2 in the style of GmanModz (Youtuber) so I have a fixed plan. I intended to do this with my experienced uncle but unfortunately, he has passed away and I would like to dedicate this to him. I have a 3d printer for the shell but, I have...
  18. Jonny

    Worklog Ps2 portable (to be named)

    Hey everyone! I've been lurking for a while now and I have decided I'm finally going to start a worklog! I'm not sure what I'm going to call this one (you Wii people have good names I'm jealous) but here's what it's going to include: 6 18650s, adding up to a 10200 Mah 7.4 volt battery pack...
  19. Question Help with my ps2

    Hi, how are you? I want to create a ps2 portable, but I'm new and I don't know a lot of how to cut the motherboard, I would like if someone could help me. Here there are some photos of my ps2 motherboard
  20. darkwing

    Worklog PIS2, a long overdue ps2 portable

    So after a short break of… around 4 years I finally got the time/ motivation to finish my PS2 portable. I couldn’t stand seeing this half finish case staring back at me, like a ghost of the modding past (see what I did there), begging to be completed. For reference this is the link to old post...
Top