Festiva
.
- Joined
- Apr 26, 2018
- Messages
- 59
- Likes
- 23
So I have an OMGWTF trimmed Wii that is not booting. When I hook my regs up to it they read 3.3v, 0.990v and 1.13v. To me 0.990v and 1.13v seem too low but im not sure. The u10 via outputs 0.5v. I had u10 relocated before trimming and it worked fine. I covered the cpu and gpu in masking tape so no dust should have gotten under them. I believe my issue is that u10 isn't getting 3.3v so its not displaying a signal. Could I be getting 0.5v from the u10 via because my 1v and 1.15v are too low? Any suggestions are appreciated.
Photos:
Photos: