wii

  1. asad

    Discussion Hi, I'm Completely New To Hardware And Portablizing and Would Like Tips!

    Hi, I'm new here and pretty damn interested in making a portable. I've always wanted to make one, since I saw a video of a GCN portable years back, and would like to know some tips! I do own a solder, I'm pretty sure its good enough because I think I saw it in a GMan video. I have enough money...
  2. Worklog Purple G-Wii Rev 2 Build

    Hi all, so I'm new to the portablising community and decided to build a G-Wii Rev, had my case printed by Gman. I'm gonna try and do a worklog but it'll be awful and missing stuff probable ahah, hope its okay though DAY 1 This is my case as it came from Gman, so I decided so start with...
  3. Frogfreak

    Question Anybody know of any 6-6.2 inch Screens with VGA (or AV).

    As the title makes obvious, i need a 6 to 6.2 inch (preferably good quality) screen for my upcoming first wii portable. so, that's the size i'm going for, but i need that kind of connection, and hopefully, not too expensive, ($50 or less hopefully). Any help is appreciated, Thanks!
  4. Cyframe

    Worklog Ashida Wavebird Worklog

    It's been a long time coming, but it's FINALLY my turn to make an Ashida! I'm hoping to have it done in time for MGC so I can show it off to the bois. My shell was printed in sla by The_Random_Guy and I truly couldn't be more grateful for him kindly selling it to me for an utter steal. While...
  5. Type-IV

    Question Wii Portable Question

    I have a question about the wiring/powering of a Wii motherboard. I created a Wii portable a while ago and now the video output is messed up. The Wii now only shows a black screen when booted up. This has happened with the last two or three times trying to create my portable after a couple of...
  6. aurzola

    Question Wii to microcontroller interface

    I want to send Some character data from homebrew app to a microcontroller to display on LCD module. Assuming no wifi. it is posible to use an output port from the wii like one of the gc controllers to read in on the microcontroller? The usb route is not posible as the microcontroller cannot act...
  7. Wesk

    Ashida Wii Portable

    It's been a long wait, that wait is now over... Get comfortable, make sure headphones are placed firmly on your head and prepare for a little introductory video to a portable that previously only existed in memes and dreams: (4k and fullscreen recommended) I could take full credit but...
  8. meepledemeep

    Worklog The CheWii

    Yay I’m making a portable, here I will ask my many questions along my journey.
  9. GlitchedFolx

    Question Building a wii portable

    Hey Everyone. Hope you are all having a great day. I was wondering if someone would be able to point me in the right direction of making a portable. I am new to the hard-modding scene and would like so assistance. I am very skeptical about just diving head first into it because I don't want to...
  10. meepledemeep

    Discussion Touch Screen Wii’s

    I’ve had a hard time finding any info on touch screen Wii handhelds and thought it would be useful to have a thread! If you have any questions or any information on such a project, let us know!
  11. Solved Viable Additional Trim?

    I've been putting together a G-Wii, but including a memory card slot. However, I recently discovered that I can't fit the memory card slot in with the Wii as I currently have it trimmed. The area marked in black sharpie is what I would need to trim off to fit the slot. From what I can tell, I...
  12. wiiplayer

    Question where can I get gamecube 2.0 board

    where can I get gamecube 2.0 board?
  13. TropicPug

    Question Wii VGA Resolution Issues

    Hi all, Been having issues with wiring up VGA to my portable. When VGA is enabled, the image is dramatically too small horizontally, and looks incredibly squished. 480i signal over AV becomes extremely shaky, awful and really hurts the eyes. I haven't messed around with any of the LCD board...
  14. Worklog My first wii portable

    So, this is my first wii portable, and I want to document the entire progress. I've relocated the u10 and bluetooth, and in a couple of hours, the dremel I ordered should arrive. I also ordered 4 PTH08080's from China, I should only need 3 though because I am planning to use a powerbank circuit...
  15. Can a 7" TFT LCD be connected to the Wii?

    I see that the screen interface has UART and Ethernet ports. Here is the datasheet.
  16. Question Switching from BBloader to RVloader without a gamecube controller

    So I have bbloader installed on my Wii, and I want to switch to RVloader, but I don't have a gamecube controller. Also, I lost the usb I installed bbloader on so I most likely need a new one. What is the procedure I need to follow?
  17. SparkleBear

    Worklog Black Beautii -- SparkleBear's G-Wii Rev 2 Worklog. :)

    Hey y'all... I finally got started on my Gwii build today. I still don't have all the parts from AliExpress but I couldn't hold back any longer. I've had so much fun building and dialing in my first portable, a purple Gboy, that I am already excited to make a second portable. Its been so...
  18. Crimson_Thunder

    Worklog My first wii portable. Welcoming name ideas, haha.

    Figured I'd at least get something with the basics working before i started a work log. Started off with u10 relocation after installing rvloader. After confirming it booted. Removed the u10 wire to ensure I didnt just rip it off and take the trace with it when trimming the board. Removed all...
  19. Crimson_Thunder

    Question Need some help with my first portable wii

    So before I waste anyones time by writing a whole speech for someone to ask, I'm using(attempting to use I think is the right word here?) Mp1584 EN module boards for my power supply. Anyone had luck with these? On my third motherboard(starting to run out of wiis with dre's to buy locally...
  20. Kayantao

    Question Questions regarding the G-Boy

    Hey im really new here and this has potentially been asked, but i couldn't find all the answers while seeking so i will just go ahead with this. (should there be an issue with me doing so, feel free to remove the thread) I only recently discovered the whole idea of actually modding consoles...
Top