raspberry pi

So it's finally time to post this project in this section I believe. It's been quite a while since I started this project and it kind of evolve over the years. From thinking of using DVD drive all the way back in 2013 to looking into obscure hard drive setup for the slim, experimenting with...

I'm making a portable emulation machine with the pi 4, and im confused about power solutions. im using this screen with this controller board. I'm new to this, if you couldnt tell. I realize that it would be difficult to power both with one battery, so i dont mind using more than one. I was...

I think I know how to do this, but I just wanna make sure before I go ahead and start. I'm planning on wiring in a headphone/amp switching circuit to my handheld (a unit running RetroPie), which is on a Raspberry Pi B+. Using this TRS jack as an example, I'm pretty sure I need to wire Terminal...

I have a christmas party to go to tonight, and I was interested in making a cool light up sweater using LED light strips, and controlling the colors of it using the raspberry pi camera so it reflects whatever the camera sees, but after researching a little I found no information on how to do...

Gidday all, Does anyone have a Seek Thermal Compact or Flir One that they'd be willing to sell for less than an arm and leg? See I've got it in my head that it'd be helpful to develop something to go on my drone that would allow me to do some thermal imaging for spotting livestock during...

Okay so I am building a portable Raspberry Pi console, and my goal is to make it as close to the Nintendo Switch in form factor and function as possible. I've been thinking about how I want to go about this and I have come to a few conclusions: I'm going to use a 7" screen that runs on 12 volts...

AWWW SHIIIII-! GET YOUR TOWELS READY, IT'S ABOUT TO GO DOWN! ( ͠° ͜ʖ ͡°) NOBBLE HAS STEPPED UP TO THE CHALLENGE! Alright folks, Ben Heck doesn't give a hack anymore. Now is the time for us in the modding community to RISE UP by blowing the minds of unknowingly innocent normies with our...

Hey guys! This is going to be my written worklog for my entry into the Hack Like Heck competition. It will be more detailed than my video entry for anyone who wants to duplicate the project later. The goal is to create a handheld gaming system within a month, so I will be making a Raspberry Pi...

I have been putting off my WiiP for a few days and felt bad about my laziness. After I had been laying in bed night after night, restless, knowing that my project was watching me from the corner of the room, I hid it away and thought about my life decisions. So I decided to go on a diet of...

While playing with this setup I was taking some notes an though compiling this into a step by step guide would benefit the community more than sitting on my laptop so after a bit of effort there it is. This guide will help you setting up a Raspberry Pi to stream games to a PS2. The point of...

So after a short break of… around 4 years I finally got the time/ motivation to finish my PS2 portable. I couldn’t stand seeing this half finish case staring back at me, like a ghost of the modding past (see what I did there), begging to be completed. For reference this is the link to old post...

(within reason) I've got a 4-layer board on the way, and I want to make something out of the ordinary. Initial thought: Pi Zero mini-terminal + Wii portable Wrap 'em in a 3DS XL case with a keyboard on the bottom half ( a la @Luke ). But I want to hear more!

Hey All, I saw these while browsing kickstarted and they sound promising. You have to be fast only 24 hours remaining.

After lurking around in a lot of pi projects forums, I found out about the GBZ, I didnt like it that much at first, But then I fell in love with it. The reason? I dunno, i just did. I decided to make my own build, but not an exact copy. So this will be my first experience with anything related...

The idea of a Raspberry Pi board trim has been thrown around on BitBuilt before, but due to the lack of Raspberry Pi activity on BitBuilt, no example of a successful trim has ever been released. Taking this trimming idea in mind for my upcoming Raspberry Pi 3 portable "Game Brick", I decided to...

HI, i am going to make a PI zero from the bottom half of a Dslite. Features: 2.8" screen (Touch) Teensy (For controlls) Powerboost 500cc Raspberry pi Zero W(ireless) USB Audio, and PMW audio i want to try to use the Ds cartridge (Female) and make it so it will accept Micro Sd cards, like...

So a while back I decided to try building a portable DreamCast, but I wanted to do it differently from most portables. My idea's are to remove the disk drive and do the IDE mod with DreamShell so I can load games off an CF card. To make it feel more like a handheld game using cartridges, and a...

I know it's not its intended use, but would it work? :XD:

https://hackaday.io/project/6478-pip-raspberry-pi-portable-slate-computer Check out my latest portable! Raspberry Pi B+ that runs off a LiPo battery and has 720p touchscreen and 3 USB ports. It may be a few years old, but I am posting this here now since I have just recently joined BitBuilt...

Yo! I have been absent from the forums for almost 4 months, and I am getting back in business baby!.. kinda. I have said this already, but I have zero experience. (See what I did there? Zero? Pi Zero? Ha! Ill go jump off a bridge now) So, I decided to start simple, no Wii portable (Ill get into...