guide

  1. YveltalGriffin

    Guide The Definitive Wii U Trimming Guide

    Preface The Definitive Wii U Trimming Guide only supports WUP-50 Wii U motherboards. WUP-50 motherboards consume much less power than earlier revisions, making them usable for portables. An addendum for earlier motherboard revisions may be released in the future. Thanks to recent discoveries...
  2. Wesk

    Guide Wii Undervolting "guide" and stats. (incomplete)

    Here is the first dirty release of the Wii undervolting "guide". This isn't an official release yet because: I'm not really sure how to structure this information in a forum post yet. I need a larger sample size of systems and tests to really dial everything in. Brief synopsis/overview...
  3. IhYpGc

    Guide 6 layer Wifi and SD relocation points

    As I'm a newbie with trimming in general I though it be best to research and get a good grasp on the soldering/relocation points. Seeing as I couldn't find any easily find any posts on relocation points for 6 layer Wi-Fi, I stared at my board until I found some (I did continuity tests of...
  4. CalebPikmin

    Screen Guides available?

    Hiya BitBuilt peeps! I have a question regarding LCD screens for portables. Mainly seeing if there is a guide out there on this subject and if someone could assist. If I buy a screen, I would also need a board that has all the components that I would need as well correct? Such as audio video...
  5. MomSpaghetti

    Guide PS2 SMB: Use raspberry pi to load ps1 and ps2 games over SMB(+ Portability optimizations)

    Hello everyone, This is my first guide for this community. A small introduction into game loading methods of the ps2. There are 3 loading methods for the ps2: USB method. HDD method. SMB method. Usually, people opt to the USB method because of its simplicity, all you need to do is connect a...
  6. Legend

    Guide Portable Wii Reference Links

    Hello Ladies and Gentlemen, *EDIT* - My bored dumb ass was going through the rules and noticed: 4. Don't Post Other User's Work Without Permission I do apologize in advance for anybody who didn't want their content linked here, please let me know if you do not want it here, and I will take it...
  7. GingerOfOz

    Guide The Exhaustive Wii Trimming and Troubleshooting FAQ

    Trimming a motherboard is generally the most daunting part of any portable. It's scary, there's no way around that. The goals of this long list are to help people feel more comfortable with the idea of trimming, preemptively answer a lot of questions people may have about trimming, and help...
  8. GingerOfOz

    Nintendo Switch Joysticks on Other Consoles

    3DS sliders have been the norm for most Wii portables for just about forever, but understandably people have been searching for options more akin to standard joysticks for reasons of comfort. Nintendo Switch joysticks are an obvious source of interest because of their size, but up until...
  9. DeoNaught

    Guide Brawl to Project M For PortablizeMii

    Project M For PortablizeMii (Pm for Pm) 1. Needed Files So first you are going to need the following ~Latest Version of Brawl builder (https://github.com/mogzol/BrawlBuilder/releases) ~3.6V of Project M (http://projectmirror.no-ip.org/) (make sure you get the Homebrew version) ~Super smash...
  10. Madmorda

    Guide Spray Painting Basics

    Customizing your console can be a very enjoyable project, but involves a lot of experimentation to find what works for you. This guide is going to go over some basic knowledge of types and brands of paint in order to help you decide what to use for your project. Paints: One of the most...
  11. GingerOfOz

    Guide Getting Going With PCB Design

    I wasn't really sure where to put this as there isn't a designated spot for PCB design stuff. If you've got BB power and think it should go somewhere else, feel free to move it. For the past week, I've spent a decent amount of time researching and tinkering with Eagle. Eagle is not a...
  12. The Next Guy

    Guide Gamecube Breakout Box

    So you are making a portable and everything is going well. Half way through you decide that you want the ability to have multiple controllers connect to your portable; oh no, you don't have any more room but for one extra port because you didn't plan it out in the beginning. Or perhaps you made...
  13. Matthew

    Guide N64 Portable Guide- Noob Friendly

    Here is a guide written by @Luke with some help from me with verifying and editing. It's not the classical Bitbuilt style but we believe that it's slightly more noob friendly. We hope that this is used in conjunction with any other official information that is documented here on BitBuilt...
  14. BitBuiltBot

    The Definitive Wii Trimming Guide

    The Definitive Wii Trimming Guide Preface Before proceeding further, you must first determine your board revision. Please use the Revision Identification Guide. This guide is primarily designed to be used with CPU-40 boards and higher. If your Wii is a 6-layer board, you will require the...
Top