@DGVaniX
I’ll drop this here for now, since I include this mod in a lot of my Ultra Slim builds—but if we continue we should probably go to a different thread as we may get into some details of just the BlueRetro.
This isn’t the same as simply soldering in a BlueRetro Core. This is the internal BlueRetro HW2 "enhanced" install, which allows you to power on, power off, and reset the console using a Bluetooth controller. It functions exactly the same as Gusse's "Methylene" so exact, it uses the Methylene FW.
I've been working on a tutorial for the fat and slims—it’s not quite finished, but for now, it lives in a thread over on the "PS2 Scene" Discord (highly recommend joining if you haven’t already).
Below is a screenshot of the BOM (in a diagram form) to help you get started. I originally set out to follow Darthcloud’s HW2 internal BlueRetro install, but I ended up creating what I jokingly call a “poor man’s Methylene”—or the “Ali-thylene.” To be clear, my intent was never to reverse-engineer Gusse’s work—just to build the internal HW2 install. However, I found myself naturally converging with elements of Gusse’s design as I progressed.
I’ve since reached out to Gusse and received his permission to write a tutorial on this DIY version. He was completely supportive. Honestly, this might convince some folks to just buy the Methylene, because it really does save time and avoids a lot of potential headaches.
That said, this DIY method is cheaper—but it’s a lot more work. Still, it was a rewarding challenge, and I learned a ton from the process.
Please remember to support and credit Darthcloud and Gusse—they’ve both contributed amazing work to the scene.
View attachment 38543View attachment 38544
