RicerEclipse

Unfortunately I was not able to figure out what happened to the original board I bought, but I will hold onto it to tinker with and see...

im not the best at taking pictures, hopefully these are clear enough.

i cleaned the board and tested the arrays, all had continuity and showed between 67-68 ohms.

I was not measuring with the display connected, but with the display connected i am still seeing 5v in the display port.

went through and rechecked, according to the trimming guide all voltage is present where needed

I’ll have to pull up the trimming guide and check voltages again. But in that picture it’s not being powered. That’s just some excess...

Yeah, thats all I have gotten so far is the fan spinning up, heat, and the optical audio port lights up.

No, no sound or video.

Disconnected and plugged it in, still nothing.

Trying to upload them, i know i read not to use image hosting sites but i cant seem to find an option to post them directly

After stumbling across this project i decided to give it a go. The only modding i have done before was installing pico chips into...