Worklog Project: PS2pocket - Brazil

[cfc_12]

dude, your work is siiiccckkk!!!

 

[Customledmods]

Looks really nice seeing his build makes me want to start on my next ps2 portable build.

 

[Al3x Portugal]

dude, your work is siiiccckkk!!!

Thank you friend!!!

Looks really nice seeing his build makes me want to start on my next ps2 portable build.

It's good to see that my work helps in something ... Thank you!


Update !!! Battery Cover:

As you can see, on the battery cover, it will accommodate the power inputs, power switch and USB port.
(Do not look at the tape on the side, I used to attach the case for photo)

Batteries accommodated, and space for the entrances.

Hot air outlet ...

I still have to worry about a few things, I forgot the volume hole, a headset, and a solution to screw the case.
I also await help from Gman or the other friends, to draw the button holes in my case, as soon as possible I will print a new one with these corrections for the new version of the laptop. Thank you!

 

[jefflongo]

Thank you friend!!!


It's good to see that my work helps in something ... Thank you!


Update !!! Battery Cover:

View attachment 5227

View attachment 5228


As you can see, on the battery cover, it will accommodate the power inputs, power switch and USB port.
(Do not look at the tape on the side, I used to attach the case for photo)
View attachment 5229

View attachment 5230

Batteries accommodated, and space for the entrances.
View attachment 5231

Hot air outlet ...
View attachment 5232

View attachment 5233


I still have to worry about a few things, I forgot the volume hole, a headset, and a solution to screw the case.
I also await help from Gman or the other friends, to draw the button holes in my case, as soon as possible I will print a new one with these corrections for the new version of the laptop. Thank you!

This looks fantastic. I love the battery compartment!

 

[Deleted member 1052]

Some seriously cool work there!

 

[BocuD]

Damn this looks good. Everything looks so well thought out. Can wait to see it done!

 

[Al3x Portugal]

This looks fantastic. I love the battery compartment!

Thank you ... I'm glad you liked it!

Some seriously cool work there!

Thank you...

Damn this looks good. Everything looks so well thought out. Can wait to see it done!

Thank you friend! Soon I will post updates, this week I will work on it at night, the work takes me a lot of time ...

 

[cacarot]

How long can you play? friend for Battery 18650 batteries at 3400 mAh

I am doing a new project 7 inch ps2 Portable screen.in vertion 90006

But the battery does not long playing

 

[Al3x Portugal]

How long can you play? friend for Battery 18650 batteries at 3400 mAh

Estou fazendo um novo projeto 7 polegadas ps2 Portable screen.in vertion 90006

But the battery does not long playing

Honestly my friend, I did not do a certain test, but I think that autonomy should be about 3:30 hours.
Are you using acrylic cases for wiii gamepad?
Are they too brittle? I'd really like to use one, but I'm afraid I'll be very fragile ... Congratulations, it's getting beautiful!

Fixed Analogs!

I'm about to start working on the controls, I need your help to set which control board to use ... I really wanted to be able to use the official control board, it's small enough that I can use it in my laptop, but I know it's harder to use, but difficult? Once upon a time a user of the forum had problems with an official control board, where he reported that he would have to add a resistor for each button ... is this true? I know there are very small solutions like MINIDS2, but here in my country, everything is more difficult, I can not buy a ...

 

[Gman]

I'm about to start working on the controls, I need your help to set which control board to use ... I really wanted to be able to use the official control board, it's small enough that I can use it in my laptop, but I know it's harder to use, but difficult? Once upon a time a user of the forum had problems with an official control board, where he reported that he would have to add a resistor for each button ... is this true? I know there are very small solutions like MINIDS2, but here in my country, everything is more difficult, I can not buy a ...

If you want the controller to register as a DS2(required for certain games), you must have a resistor (around 22K ohms I think) connecting each button to the common. If I recall correctly, start and select is exempt from this.

 

[cfc_12]

How long can you play? friend for Battery 18650 batteries at 3400 mAh
But the battery does not long playing

Same, I have the same battery, after charging for more than 8 hours, I can only use it for less than 20 minutes

 

[Al3x Portugal]

If you want the controller to register as a DS2(required for certain games), you must have a resistor (around 22K ohms I think) connecting each button to the common. If I recall correctly, start and select is exempt from this.

I understand, I think it is feasible since the board is small ... as soon as I have all my controls fixed I will do some tests to see if it works ... thank you very much for the answer!

Same, I have the same battery, after charging for more than 8 hours, I can only use it for less than 20 minutes

There seems to be something wrong, with my battery pack, I'm working at 7.4v at 5000mha. I'm sure it lasts more than 3H at full charge ... Are not you using poor batteries?

 

[cacarot]

I understand, I think it is feasible since the board is small ... as soon as I have all my controls fixed I will do some tests to see if it works ... thank you very much for the answer!



There seems to be something wrong, with my battery pack, I'm working at 7.4v at 5000mha. I'm sure it lasts more than 3H at full charge ... Are not you using poor batteries?

My original ps2 board was not cut to reduce electricity consumption.
Can I reduce my electricity consumption?
Thank you

my ps2p body it takes a long time. This my project case I spent 2 weeks
Sandpaper scrub
ps2 Portable Im use acrylic cases for wiii gamepad friend
not brittle friend if you add up Poly putty tightly

 

[jefflongo]

Can we use a bad battery? Because I brought from the old notebook.

Cool case, but try not to double/triple/quadruple post. If you need to add things to a post, use the edit button. Also, this definitely needs its own thread!

 

[cacarot]

Cool case, but try not to double/triple/quadruple post. If you need to add things to a post, use the edit button. Also, this definitely needs its own thread!

Thank you friend
I'm from Thailand, I might
Have trouble communicating the language
But I want to study with you friend Because Thailand has no information for those who love the diy game portable. And I'm sorry if the language is wrong.

 

[Al3x Portugal]

In the Last Days, I fixed the controls buttons:

If you want the controller to register as a DS2(required for certain games), you must have a resistor (around 22K ohms I think) connecting each button to the common. If I recall correctly, start and select is exempt from this.

I think I found my solution to the controls board, I'll cut out this unofficial board, and weld directly on the small tracks ... so I will not need the resistors ... I think it will work!

 

[Nold]

Damn, this is really one of my favorite worklogs on BB right now
such nice & clean work - keep it up!

 

[Gman]

Good work. I use the same controller, it should work. Are you planning on painting the case?

 

[Al3x Portugal]

Good work. I use the same controller, it should work. Are you planning on painting the case?

Of course my friend! the case will have a work of mass, sandpaper, paint and varnish ... I will try to make a good finish ...

 

[Madmorda]

This is some sexy project progress. It looks so clean Keep it up!