There is a small transistor at the top of the GC controller. Try soldering the data wire to the side of the transistor with only 1 pin. Do you know if the issue is that the buttons aren't working, or the controller just straight up is "not connected"?It's soldered to the pin called "data in" on the controller guide on this forum. I tried to copy the trim from your wiiboyv2 exactly.
I haven't fully mapped out the data line circuit, but I've had your problem before and somewhere along the line it connects to that transistor and it seems to solve the issue.So the transistor leg as the data line seems to have solved the issue.... Do we have any idea why that solved the issue? Thanks gman lol.
Thanks bro. Yes, I will use the top two screwposts, and two small screws at the bottom.do you plan on closing the unit with little screws on the side of the case? this is looking spectacular, Pengy