- Joined
- Mar 15, 2022
- Messages
- 2
- Likes
- 0
Yes I was thinking of doing something exactly like that but making two main Joycons rather are wii motes and then a separate set using the wave bird thing by plugging it in to like the bottom or top
Discussion Ideas, questions, etc, Post em here!
- Thread starter cheese
- Start date
Yes I was thinking of doing something exactly like that but making two main Joycons rather are wii motes and then a separate set using the wave bird thing by plugging it in to like the bottom or top
Ethan
.
- Joined
- Apr 20, 2019
- Messages
- 39
- Likes
- 38
All the values of Any component are listed here.
Hi. I hope this is the right place for my question. I received a Portable PS2 from a colleague. The console itself works fine. However, I have problems with the sound. As soon as I go above 720p resolution, I have the sound cut out every few seconds and a loud noise is audible. Since I am a beginner I would be grateful for a tip. The noise can be heard in the video.
youtube.com
PS2 Portable sound problem
Enjoy the videos and music you love, upload original content, and share it all with friends, family, and the world on YouTube.
youtube.com
You should make a thread in the Sony section and share photos of the inside.Hi. I hope this is the right place for my question. I received a Portable PS2 from a colleague. The console itself works fine. However, I have problems with the sound. As soon as I go above 720p resolution, I have the sound cut out every few seconds and a loud noise is audible. Since I am a beginner I would be grateful for a tip. The noise can be heard in the video.
PS2 Portable sound problem
Enjoy the videos and music you love, upload original content, and share it all with friends, family, and the world on YouTube.
99Kap
.
- Joined
- Apr 24, 2022
- Messages
- 5
- Likes
- 1
If i have a possibly loaded question should i post it here? I don't want to waste anybody's time so I'd like to post it in the proper place.
I'm in the early stages of learning to build a Wii portable and i still need to get a handle on the etiquette of BitBuilt.
I'm in the early stages of learning to build a Wii portable and i still need to get a handle on the etiquette of BitBuilt.
If you are working on a portable I would suggest creating a worklog and asking your questions there.
99Kap
.
- Joined
- Apr 24, 2022
- Messages
- 5
- Likes
- 1
Oh thank you very much!
MWD_NAME
.
Hi, I’m very new to this area and I was looking to get my hands dirty in a portable wii. The things I’ve decided on so far is
1. 3D printed housing
2. Gman’s pms
3. Gman’s u-amp
4. GameCube style controls (don‘t quite understand that part yet)
I think i’m going for 4000 mah (or around that) for battery capacity in 2. cells.
what do people recommend I do for the screen and how I do the controllers?
Also, what speakers do people recomend?
1. 3D printed housing
2. Gman’s pms
3. Gman’s u-amp
4. GameCube style controls (don‘t quite understand that part yet)
I think i’m going for 4000 mah (or around that) for battery capacity in 2. cells.
what do people recommend I do for the screen and how I do the controllers?
Also, what speakers do people recomend?
Jman3350
.
- Joined
- Sep 17, 2021
- Messages
- 2
- Likes
- 0
Hello, I recently purchased a couple Wii's to eventually attempt to make portables out of. One of the Wii's I bought was a no-power. No LED at all on the front. I want to attempt to repair this, so I can have an extra board in case I mess up trimming, but also use this as a practice board anyway. When I google "Wii no power" or similar all the results I get are people just talking about "resetting" the AC adapter. Is there any guide/any resources someone could point me to so I can troubleshoot the no power? Main fuse right by AC connector appears to be continuous so I don't think that's blown, that's as far as I got
- Joined
- May 26, 2022
- Messages
- 1
- Likes
- 0
Hey, I'm a bit newer to the site and not sure where is should go to ask questions.
But does anyone know if there's any issues with X-raying the nintendo wii? anything that would be damaging, I was planning to X-ray mine but I wanted to make sure the console would still be functional afterwards.
But does anyone know if there's any issues with X-raying the nintendo wii? anything that would be damaging, I was planning to X-ray mine but I wanted to make sure the console would still be functional afterwards.
- Joined
- May 29, 2022
- Messages
- 25
- Likes
- 9
Hi, I’m planning a project using the SCPH 7900X PS2. I’m very new to the idea of trimming.
Is it safe to cut off the right most USB port in order to make the board a perfect rectangle? Will everything else still work ok?
Is it safe to cut off the right most USB port in order to make the board a perfect rectangle? Will everything else still work ok?
Check out the ps2 trimming guide, also you should make a thread in the ps2 section and post pictures so you could get better help.
AFE123
.
- Joined
- Mar 2, 2020
- Messages
- 119
- Likes
- 66
- Portables
- 1ish.
I'm planning on buying a resistor kit off amazon, any suggestions? Another question regarding regulators. For custom regulators, how far can I deviate from the guide's prescribed voltage (ex: 3.5V line on PS2). Is there a specific number or percent?
I don't know the PS2's sensitivity, but a 10-15% margin is perfectly fine for the Wii. Ideally you want to be as close as possible, but you can undershoot the resistance a little bit to account for voltage drop under load
AFE123
.
- Joined
- Mar 2, 2020
- Messages
- 119
- Likes
- 66
- Portables
- 1ish.
- Joined
- Jun 6, 2022
- Messages
- 5
- Likes
- 0
Is there anywhere I can find a template or guide on how to trim up a Wii to use as a "mini" Wii? I'm looking to make one that has the power and AV out ports along with a GameCube port somewhere.
Search "Noldtendo"
- Joined
- Jun 6, 2022
- Messages
- 5
- Likes
- 0
I can't seem to find it, where should I search for it?
Similar threads
