Question Video board help

Discussion in 'Wii' started by Blitz4597, Jun 3, 2019.

Tags:
  1. Blitz4597 .

    Joined:
    Apr 8, 2019
    Messages:
    6
    Likes Received:
    0
    I'm using this screen for my portable wii: 5’’ Inch TFT LCD Car Color Rear... https://www.amazon.com/dp/B019GQLNJU?ref=ppx_pop_mob_ap_share

    Which this is the first time ive ever done this, but im trying to figure out where i need to solder the magnet wires from here:

    [​IMG]


    to somewhere on this board:

    [​IMG]

    idk if anyone has worked with a board or screen like this before but i thought i would ask. If not i'm welcome to other screens. I also have a Gwii case so if worse comes to worse i can just buy another screen that better fits.
     
  2. Stitches 2 and a Half Dollarydoos Staff Member . .

    Joined:
    Feb 5, 2017
    Messages:
    1,239
    Likes Received:
    1,132
    Location:
    Banana Bender Land, Australia
    Portables:
    6
    The yellow/white wires on the screen's driver board are the AV inputs. Connect your Wii's composite video output to one of those points, most likely the yellow one, and it should work automatically.

    Refer to the Wii Trimming Guide for where to get composite video output from the Wii. Also you'll want to use shielded wire for video, magnet wire picks up all the interference.
     

Share This Page

Loading...