Question Video board help

Joined
Apr 8, 2019
Messages
8
Likes
0
I'm using this screen for my portable wii: 5’’ Inch TFT LCD Car Color Rear...
Which this is the first time ive ever done this, but im trying to figure out where i need to solder the magnet wires from here:

smolport.jpg



to somewhere on this board:

smolboard.jpg


idk if anyone has worked with a board or screen like this before but i thought i would ask. If not i'm welcome to other screens. I also have a Gwii case so if worse comes to worse i can just buy another screen that better fits.
 
Last edited by a moderator:

Stitches

2 and a Half Dollarydoos
Staff member
.
.
Joined
Feb 5, 2017
Messages
3,773
Likes
2,981
Location
Banana Bender Land, Australia
Portables
6
The yellow/white wires on the screen's driver board are the AV inputs. Connect your Wii's composite video output to one of those points, most likely the yellow one, and it should work automatically.

Refer to the Wii Trimming Guide for where to get composite video output from the Wii. Also you'll want to use shielded wire for video, magnet wire picks up all the interference.
 
Top