Question Replacement N64 analog stick with PS2 or PS3 analog stick

[SuleMaker]

Hi!

I have saw people using ps2 or ps3 analog stick with the N64 controller PCB but I can't find any tutorial to do that.

How could wire a ps3 analog stick set to the PCB of the N64 controller? Is straight forward? Do I have to make any adapter with arduiino or similar?

Thanks!

 

[Nodel]

Don't take my word for it but I would think you would need an audrino

 

[Pablo]

The analogue signals used by the n64 are weird, and as such can't be replaced by a modern stick. You'll need a conversion layer, GMAN used a PIC in his N64SP

 

[SuleMaker]

The analogue signals used by the n64 are weird, and as such can't be replaced by a modern stick. You'll need a conversion layer, GMAN used a PIC in his N64SP

I would like to do that using some arduino board, but I don't know where start to research...I am lost about that...

 

[Milosonator]

I was planning to try this: https://github.com/jtryba/atmega328-N64-controller

 

[SuleMaker]

I was planning to try this: https://github.com/jtryba/atmega328-N64-controller

I saw this too. It's a easy way but memory pack is not emulated so you can't save game...

After a lot of research I will try this way: https://nfggames.com/forum2/index.php?topic=5803.0

 

[Miceeno]

Most 3rd party N64 controllers use a standard 10K pot analog stick. Only the first party controllers need the conversion.