Worklog Nintendo MiWii "First Portable"

[TheFrenchGuy]

really ? because I never read that

Rectification, it's possible but it's harder, it take more current and you can't relocate Wifi, GC memory card, SD card slot and disk drive.
Here is the guide : https://bitbuilt.net/forums/index.p...ive-wii-trimming-guide-6-layer-expansion.860/

 

[Kagehoshi]

Rectification, it's possible but it's harder, it take more current and you can't relocate Wifi, GC memory card, SD card slot and disk drive.
Here is the guide : https://bitbuilt.net/forums/index.p...ive-wii-trimming-guide-6-layer-expansion.860/

it's not the only difference :

6 Layer boards:
- Consume much more power
- Create much more heat
+ Are more common: easier to find
+ Easier for newcomers to portablizing
4 Layer boards:
- Consume much less power
- Create much less heat
+ Are less common: easier to spot
+ Requires a bit more soldering finesse

https://bitbuilt.net/forums/index.php?threads/revision-identification-guide.863/

 

[TheFrenchGuy]

it's not the only difference :

6 Layer boards:
- Consume much more power
- Create much more heat
+ Are more common: easier to find
+ Easier for newcomers to portablizing
4 Layer boards:
- Consume much less power
- Create much less heat
+ Are less common: easier to spot
+ Requires a bit more soldering finesse

Thank you to share this, i have a 4 layer board but it's still cool to know, i hope you will have chance when you will receive your wii.

 

[Kagehoshi]

Hi, for the battery, I will do 2S and 2P, 2 x (2 x 3.7V 3400mAh) => 7.4V 6800mAh
I took this to charge: "Intelligent-Balance-Charge-Protection-Board-2S-Packs-18650-Lithium-Satellite"
but is it enough?

Is this image correct for the connection?
https://s3-ap-southeast-1.amazonaws...6/10/17/9b87ssp671gczcys/b0530bd8d6fdef49.jpg

 

[jefflongo]

Hi, for the battery, I will do 2S and 2P, 2 x (2 x 3.7V 3400mAh) => 7.4V 6800mAh
I took this to charge: "Intelligent-Balance-Charge-Protection-Board-2S-Packs-18650-Lithium-Satellite"
but is it enough?

Is this image correct for the connection?
https://s3-ap-southeast-1.amazonaws...6/10/17/9b87ssp671gczcys/b0530bd8d6fdef49.jpg

Yes I've used that board, it works well. That image is correct too.

 

[Kagehoshi]

Yes I've used that board, it works well. That image is correct too.

Great, thank you

 

[lyberty5]

Hi french bois,

Good to know there are some of you here.

For parts with terrible shipping, you can look to aliexpress, they generally offer free shipping on most of the items you'll find on ebay like squishy tact switches, 3Ds sliders and such.

 

[Kagehoshi]

Hi french bois,

Good to know there are some of you here.

For parts with terrible shipping, you can look to aliexpress, they generally offer free shipping on most of the items you'll find on ebay like squishy tact switches, 3Ds sliders and such.

Hi @ lyberty5,

Yes, I buy on Aliexpress, Ebay and Amazon too. Just for the PTH08080WAH, on Farnell