Worklog My first GCp

[Panchuflenks]

This may be a shot in the dark, but why not clamp it down with a rubber clamp then, once you have sufficient pressure, epoxy it to the board to ensure that the pressure remains constant.

I already tried it but there is no equal presure on the entire connector. I think that a better solution is have another megadrive :c

 

[minnieman]

I already tried it but there is no equal presure on the entire connector. I think that a better solution is have another megadrive :c

You may be right, and I think they are on back order from badassconsoles. You could try posting in the buying/selling section?

 

[Providencial]

You could try posting in the buying/selling section?

Lovely idea, but dude lives in Chile, kind of a long shot...

Or not! I have one! Here in Santiago! =)

Writing PM now!

 

[minnieman]

Lovely idea, but dude lives in Chile, kind of a long shot...

Or not! I have one! Here in Santiago! =)

Writing PM now!

I love the internet

 

[Panchuflenks]

Importante update!
Finally! I made it works!

my wasp fusion works flawlesly!, now the controller with "maybe" auto turn off when i connect the first player on my "gamecube multitap"

Ps:
I forgot to vive thanks to providencial for the megadrive

 

[Panchuflenks]

UPDATE

I have a short time to work in the console right now, I'm creating a 3d printing service to sell so need to keep the webpage and capture clients.

so..

I relocated once again que " modular multitap" connection .

and also re-rewire the usb connector because lastly i was having a lot of problems with it. so...

to.

ps: the blue metal thing in the middle of the table (nearly the sd) is the "trompe" the musical instrumenta dat plays the "toing" sound hahaha

 

[Panchuflenks]

Hi guys. here with a little "problem"


When the gc autoboots on swiss the screen turns white like un the video and i can navigate but blinded.


If GC autoload and run swiss over replay menú nothing wrong happends.

I checked que swiss resolución and tried in 480i, 480p and auto and its the same

 

[Aurelio]

Are you using composite video output or what?

 

[Panchuflenks]

Are you using composite video output or what?

Im using rca cable

 

[cheese]

The yellow RCA plug is composite video

 

[Aurelio]

Ok then can you try it on another monitor or a tv? If you get the same error can you try to load the swiss updater? It should be easier to load it if you put only that in your SD card
Also check if you have connected something to the DetectCable pin of the digital output by mistake (see http://gamesx.com/wiki/doku.php?id=av:nintendodigitalav for reference). If the gamecube sees an high level on that pin then Swiss automatically output 480p that doesn't work on composite video.

 

[Panchuflenks]

Update number... I dont know

working in the final audio solution for my portable.
I will use the 3ds volume potenciometer to get lower or higher audio.
Actually i have 2 audio amps for every channel because the Hxj8002 chip audio output is mono.

the screen part with amplifiers finished, only i need to close all and make the expansion case for screen.

here is a little video...



i have a little question about sound amp

If I relocate que audio after the gamecube's audio amp(on output), i need to put 5v on it to have sound?

 

[Noah]

Damn man, that looks great!

 

[bentomo]

This one is starting to look pretty sick!

 

[ShockSlayer]

If you're grabbing audio directly from the AVE-DOL then you don't need to put 5v anywhere.

 

[Panchuflenks]

If you're grabbing audio directly from the AVE-DOL then you don't need to put 5v anywhere.

sure, but i would like to get a little more power on sound output but the amps works fine with 5v. i was thinking that if i apply Tchay's audio fix maybe i'll have more volume for speakers cause they are a little slow

 

[Panchuflenks]

soon i'll update my worklog.... need to whow you a little things :B

 

[Panchuflenks]

I really would like to continue this portable. but i dont have time and money

 

[Aurelio]

Take your time, even if you take 2 more years, I definitely want to see your portable to be completed, it is so cool!

 

[Providencial]

Today Panchuflenks stopped by my work and picked up a TI regulator he needs to continue with this project!

He has also gotten over a filament drought for his 3d printer.

Please all bully (or encourage?) him to get back on the portable!