Hili's N64HHv2

[Hili]

I finally finished my N64HHv2. After I got some trouble with the joystick calibration, I found a soultion that worked for me. Instead of using Gman's code, I used the code from Jakob Schäfer and made my own PCB for it. I attach the gerber files for anyone that has the same problem. Here are some pictures of my build:

Because I had revision 6 mainboard, I couldn't solder more RAM onto the mainboard. But I really wanted to use my expansion pak, so I cut it to the right size and bent the memory chip to a 90 degree angle.

I also finished my SummerCart64, which is a perfect fit for this portable. You can see it in the 5th picture.

 

[supertazon]

Beautiful work! The case was resin printed in black from JLCPCB?

 

[Hili]

Yes it's their black resin and the shoulder buttons are nylon.

 

[Teatimetim]

I like your idea of the xpac, but I think bending the PCB and gluing it may be better in the long run for added support. Thanks for sharing about the joystick code, will need to try that in mine!

 

[Hili]

I also found a case that fits pretty nice. It's not the best but it's cheap.
You can find it here: https://www.aliexpress.com/item/1005006937868170.html

 

[Nicholas298]

Amazing build! It looks really clean

 

[JellyGhost333]

Amazing build! It looks really clean

How do I contact you for a "commission." To build the N64HH V2. Please take my money!

 

[randomguy]

Not sure

How do I contact you for a "contract." To build the N64HH V2. Please take my money!

I'm not sure @Nicholas298 is doing commissions,but if I remember well,@CrazyGadget and @Crazzyleprechaun have done some in the past(not trying to take somebdy job by the way )

 

[JellyGhost333]

It looks like the word was "commision" I was looking for. I only found this by talking with helpful garbage AI Google.

Is there a preference on who's better?

 

[randomguy]

Yeah, that was what I meant(sorry lol),and I advice you to check on the selling part of bitbuilt who already done some in the past,it's easier to find somebody that can make one for you

 

[JellyGhost333]

I msgd @Nicholas298 too, just in case. No one better than the authentic creator.

 

[JellyGhost333]

I actually tried looking there first & had no luck. That's also probably in part due to my ignorance & lack of experience with this site, but I found this thread here & it looks like I may have gotten what I need so thx

 

[randomguy]

Oh ok,get it, and yeah no problem
By the way you can also check on bitbuilt's discord server,sometimes it helps a bit.

 

[Senor Avocado]

i am selling one https://bitbuilt.net/forums/threads/for-sale-black-resin-n64-hhv2.7330/#post-77117