porc
.
- Joined
- Dec 7, 2023
- Messages
- 18
- Likes
- 2
I am working on a 6 layer trim based on Nold's Miicro. I finished the trim, tested the resistances and everything seems good to go, but when I have 5V connected to AV it won't turn on. When the 5V is disconnected (white wire shown below) it turns on, evidenced by the CPU heating up. I have tried connecting 5V both to the C110 pad as shown in the picture as well as to the AV pins directly. When the 5V is disconnected, all voltages look good; when it's connected, voltages are 0. I have tested and re-tested all the voltage lines, verified that they're connected to the right pins, and double checked the u10 relocation (which has caused me a lot of problems already) and everything seems to be right. How do I troubleshoot this? Why would connecting 5V cause the wii not to boot?
Attachments
-
1.5 MB Views: 33
-
1.9 MB Views: 34