Question SD card slot

Discussion in 'Wii' started by Toaster912, Mar 1, 2017.

Tags:
  1. Toaster912 .

    Joined:
    Feb 13, 2017
    Messages:
    243
    Likes Received:
    47
    I think my SD Card slot is dirty what can I clean it with? And that's probably why portablizemii isn't showing up:/ is it that dirty?
     

    Attached Files:

  2. Matando .

    Joined:
    Apr 16, 2016
    Messages:
    68
    Likes Received:
    117
    You can clean it with some rubbing alcohol. If you are speaking about portabalizemii not showing up after you installed the mod pack it's because that only works from USB.
     
  3. Toaster912 .

    Joined:
    Feb 13, 2017
    Messages:
    243
    Likes Received:
    47
    Thanks but I meant the boot mii isn't loading. Then do I blow dry it after I clean it with the rubbing alchahol? To dry it?
     
  4. Matando .

    Joined:
    Apr 16, 2016
    Messages:
    68
    Likes Received:
    117
    Toaster912 likes this.
  5. Toaster912 .

    Joined:
    Feb 13, 2017
    Messages:
    243
    Likes Received:
    47
    Thanks for the help
     
  6. Cid .

    Joined:
    Feb 16, 2017
    Messages:
    20
    Likes Received:
    3
    Location:
    Canada
    You can also clean dirty contacts with acetone and Q-Tips if you have some. Be careful with acetone though. Especially with plastic. It's a bit corrosive. So wear safety googles ans read the precautions on the sticker before using this. Don't forget to wash your hands when you are done. I use it on my electronics class and it works well with dirty contacts and flux on PCBs.
     
  7. Matando .

    Joined:
    Apr 16, 2016
    Messages:
    68
    Likes Received:
    117
    Just wanted to note since there are still replies to this thread that there is nothing wrong with Ryan M's SD Card slot. Not even the fact that the metal casing might be dirty.
     
    Stitches likes this.

Share This Page

Loading...