Danielle
.
- Joined
- Feb 25, 2019
- Messages
- 22
- Likes
- 0
I have been looking for many screens that fit the 5v ratio for my portable Wii, but....
The screen I have in mind fits the 480p resolution, but the voltage is always 12v
None of them at at least 4inches!
Also, I read about using RasberryPi screens. So I won't use them.
Or is there a way to remove the 12v to the 5v for the drive board and the 3.3v for the screen?
Also, about the driver board... Is there some that are smaller than the usual ones that I see?(around 10cmx5cmx1cm)
Could I get some suggestions? (with link please!)
Here are some that I have in mind:
https://m.aliexpress.com/item/32826...d=7101amp-Q4G1VIUnVMGyMd1jfqvnxA1552491264738
https://m.aliexpress.com/item/32950...4.0&pvid=39391f49-9e16-40d3-8d63-3c1b57998c51
The screen I have in mind fits the 480p resolution, but the voltage is always 12v
None of them at at least 4inches!
Also, I read about using RasberryPi screens. So I won't use them.
Or is there a way to remove the 12v to the 5v for the drive board and the 3.3v for the screen?
Also, about the driver board... Is there some that are smaller than the usual ones that I see?(around 10cmx5cmx1cm)
Could I get some suggestions? (with link please!)
Here are some that I have in mind:
https://m.aliexpress.com/item/32826...d=7101amp-Q4G1VIUnVMGyMd1jfqvnxA1552491264738
https://m.aliexpress.com/item/32950...4.0&pvid=39391f49-9e16-40d3-8d63-3c1b57998c51
Last edited: