https://bitbuilt.net/forums/index.p...s-noob-question-thread.253/page-18#post-22375I know this isn't related but what wires should I use on the regulator and what should I use for wiring the Wii.
For a Wii, use 22-24AWG wire for power, and the resistors can be found on ebay or digikey. If you can't find the exact values, just get 1/4w resistors with a lower value than what the table says. You can safely use resistance values up to 10% lower than what the table says and still be fine. 330ohm instead of 353ohm is fine for the 5v reg, for example.Just wondering what thickness of wire should I use for the regulators also where can I find the specific resistors?
One more thing can I use this for any of it https://www.banggood.com/5-MetersLo...s=detail-left-viewhistory__1&cur_warehouse=CN.
Thank you.