Solved Fried My Trim?

Saix

.
Joined
Jan 23, 2017
Messages
28
Likes
8
So I was wiring up the 3v lines to the bluetooth module and I accidentally hit the ground pin of my power switch (soldered to the board ground) with the end of one of the wires because I'm dumb and wasn't being careful and paying attention. Saw and heard a spark and now the board wont boot. The switch wasn't pressed so the board wasn't powered on, but I had unfortunately forgotten to unplug the power cable. I always unplug it before doing any soldering and of course the one time I forget to is the time I short something. Nothing seems to be wrong with anything but the wii; the regulators and power switch still work just fine, and the cpu and gpu even still heat up but my flash drive no longer blinks and i get nothing from the tv. I assume this is beyond repair:(?


Edit: Never mind I'm dumber than I thought apparently. Two of the regs are kaput. I'll get some new ones. Marked as solved.
 
Last edited:
Top