- Joined
- Jun 30, 2022
- Messages
- 15
- Likes
- 4
Hey gang,
Lurked here for a while and decided to try my hand on the Ashida since a lot of the work is done for you by the 4Layer boards.
Have wired up the wii board twice with two different trims but am unable to get anything to show up on the screen.
Screen flashes blue with VGA in the corner before turning black and then that's all that happens.
Wii gets nice and hot when powered on so something is happening there but nothing is showing up. I'm trying to test using composite and the screen never gives any sign that it is receiving any sort of AV signal.
Attached a few photos to give everyone an understanding. This is more just a test wire up so I haven't hooked up USB yet but started hooking up VGA to an extent by soldering the RGB vias but haven't wired MODE to 3.3 as of yet.
I *think* that u10 is wired correctly - hooked up to the PMS.
This is my second trim and has been sanded pretty well. Thought that I must have messed up the first trim so moved on to my backup wii but considering that I am getting the exact same problem - wii heating up but nothing on screen, I am assuming I am doing something else wrong.
Thanks in advance for any help, guys!
Lurked here for a while and decided to try my hand on the Ashida since a lot of the work is done for you by the 4Layer boards.
Have wired up the wii board twice with two different trims but am unable to get anything to show up on the screen.
Screen flashes blue with VGA in the corner before turning black and then that's all that happens.
Wii gets nice and hot when powered on so something is happening there but nothing is showing up. I'm trying to test using composite and the screen never gives any sign that it is receiving any sort of AV signal.
Attached a few photos to give everyone an understanding. This is more just a test wire up so I haven't hooked up USB yet but started hooking up VGA to an extent by soldering the RGB vias but haven't wired MODE to 3.3 as of yet.
I *think* that u10 is wired correctly - hooked up to the PMS.
This is my second trim and has been sanded pretty well. Thought that I must have messed up the first trim so moved on to my backup wii but considering that I am getting the exact same problem - wii heating up but nothing on screen, I am assuming I am doing something else wrong.
Thanks in advance for any help, guys!
Attachments
-
3.8 MB Views: 107
-
3.7 MB Views: 106
-
3.8 MB Views: 99
-
1.6 MB Views: 99
-
1.6 MB Views: 104