1. LRFPV

    Worklog Wii Motion++ (RetroPie+Raspberry Pi+Wiimote)

    Hello, this is my first thread; so if I seem a bit out of place...I'm still learning haha! This is a little project I call Wii Motion++ It's a Raspberry Pi running RetroPie and a 1.3 inch LCD shoved into a Wii Remote. Fully functional buttons (D-pad, 1, 2, A, B, and yes, even the power button...
  2. jaehyeong

    Question dark lcd

    The backlight on the screen comes out well, but screen gets dark whenever there's a signal. What's the problem? There was a time when the + and- of the lcd driver board were connected in reverse, but was it damaged then? Or because did i accidentally leave the ps2 without a heat sink or pan...
  3. Question Looking for screens for a wii portable

    I can't seem to find a good screen on the internet, the best I found was this but it doesn't have a VGA input, and I am not sure how good Wii games will look on that low resolution. Then there is this which also has those problems. I am going for something like 3.5 inches. Any recommendations?
  4. ModerateGamer

    4:3 Screen recommendations?

    Hi, I'm looking for a 4:3 screen to use in my build but that is proving really tough all the screens I find are 16:9. Ideally I'd like to stick to 4:3 and if possible ips which I'm sure is just a pipe dream. I saw a video not too long ago and the guy had just that, I messaged him but got no...
  5. Omar Elsayed

    Question Using 3ds analog stick as a gamecube analog stick replacement

    I want to build a wii portable and want to use 3ds analog sticks. Do I just use the caps? Or do I somehow replace the analog stick on the gamecube with it. If yes, how do I do it?
  6. Question Wii portable battery and other questions (beginner)

    Hello guys, I am currently planning on building my first Wii portable with a MB trim. After hours of research in the forums I began to make a list of parts to buy. I don't want to waste money by buying parts that won't work toghether, therefore I wanted to ask a couple questions before buying...
  7. Question Recommended 7-inch LCD for N64 Portable?

    I have a proof-of-concept running using a 5-inch ZJ050NA-08C based on suggestions here. Display looks great! It would be nice to have a slightly larger display. Is there a 7-inch (or close) display that looks as good as the ZJ050NA-08C on the N64? I see these two options in the BOM, opinions...
  8. Soulheaven


    Hello everyone, given that this is my first PS2 portable project, I wanted to know some tips on how to do this at both the video level and the sound level. First of all, at the time I wanted to increase, and to decrease the volume using keys without a potentiometer, only keys I wanted to know...
  9. nobble

    Board scan Consolized Gameboy Guide: Wiring a NES controller to a DMG

    Hey BB, As (hopefully) you all know, I love Gameboy modding with an undying passion. It was my first ever console. My first venture was a dual clock mod for the Gameboy pocket years back. This post has board scans of both the front lcd, and back cartridge PCBs. Along with info and diagrams...
  10. Daquantrius Johnson

    Question The search for the illustrious 3.5" lcd component compatible driver board

    after many years of wandering the abyss and conversing with oriental merchants in their dialect of english, I have found only one option for using YPbPr with a 3.5" screen: the MST703 LCD driver ic supports YCbCr and YPbPr according to this datasheet. It also appears to have automatic video...
  11. Tech Flare

    Salvaged LCD Monitor doesn't display anything

    Ok, so I decided to follow this tutorial by DIY Perks: And try to make a DIY Laptop monitor from an old Laptop screen. I started by salvaging a 12 year old laptop that still worked but was so slow it couldn't be used. It was an HP Compaq computer (can't remember what it was called). Then I...
  12. MiseriesChild

    Case Question - LCD Screen Mounting

    I posted this in my Work log but wasn't sure if this would be a more appropriate place to ask this question.