Question VGA/ypbpr

[evertonfs]

Hi guys, I wish someone could help me.
I have a video controller card (PCB800099-V.9). And I'm trying to catch the ypbpr signal. I connected the cables, but I am not receiving a video signal. Can anyone tell me what I'm doing wrong?

 

[Wesk]

VGA and Component are very different signals, you can't just wire up a component video signal to VGA and get an image. You'll need to perform a VGA mod on your PS2.

 

[evertonfs]

Sorry for the question, it's because I'm a layman on the subject. In the case now I need to configure the PS2 software? Or do I have to modify something in the connections I made?
How to make VGA mod?

 

[Wesk]

The RGB and HV signals are shown here:

You will also need to force 480p (31khz) video output as the PS2 runs mostly in 480i (15khz) by using something like GSM: https://www.psx-place.com/resources/graphics-synthesizer-mode-selector-gsm.678/

Most VGA displays will not display anything less than 480p.

 

[cfc_12]

what screen are you using?

Eyoyo screens accepts Component which is R, G, B and Ground

 

[Wesk]

what screen are you using?

Eyoyo screens accepts Component which is R, G, B and Ground

Not to be pedantic but component is not RGB. Component is Y (Luma), Pb (blue channel) and Pr (red channel). RGB and component aren't interchangeable.