https://www.ebay.com/itm/34-AWG-Gau...e=STRK:MEBIDX:IT&_trksid=p2057872.m2749.l2649What kind of wire do I need for the u10 relocation, all the wires I have are to big
Is this also the same kind of wire that I would need for majority of other stuff
22 gauge on power lines. 24 is going to be too thin for some, so it's best to just use 22 for the big ones.yes, you can use it for about anything EXCEPT your power lines,
Something like 24awg wire is recommended for Power lines
You can, but they have even worse range than 3DS sliders.Can I use psp joysticks instead of 3ds on the gc+ or would that not be good?
yesIs the audio amp on the BOM good
Or are there any better ones that's someone could recommend
If there was a better one it would be in the BOD insteadIs the audio amp on the BOM good
Or are there any better ones that's someone could recommend
You can trim the heatsink pretty small on a 4 layer. 6 layers need more cooling so they can't go quite as far.(Can I trim it, and if so how far can I trim the wii heatsink?)
The protection board was a givenYou can trim the heatsink pretty small on a 4 layer. 6 layers need more cooling so they can't go quite as far.
Also, don't forget a protection circuit for your batteries.