RVLoader v2.1

[Aurelio]

Yesterday night I started accepting feature requests through GitHub's discussion interface. This will allow me to have them listed somewhere and address them one by one when I get the chance to do that. Having very little free time to put on RVLoader, this is the only way for me to keep them organized and not forget about them.
So, from now on, if you have any feature request, post them here: https://github.com/Aurelio92/RVLoader/discussions/categories/ideas. Yes, it will require you to have a GitHub account, but this is the only way I might address a feature request from now on.

 

[icy_system]

Hi! I have a problem with RVLoader. I have it installed and setup, but when I try to play a Wii game it stops at a screen and says, 'FSAccessPatch:93A112FE" after I click on the Wii game icon. Then, it stays on that screen until I restart the Wii. If anyone has any idea what is happening, please let me know. Thanks!

Edit: I think that my best bet is to reinstall, but I can't find how to uninstall it.

 

[Aurelio]

Hi! I have a problem with RVLoader. I have it installed and setup, but when I try to play a Wii game it stops at a screen and says, 'FSAccessPatch:93A112FE" after I click on the Wii game icon. Then, it stays on that screen until I restart the Wii. If anyone has any idea what is happening, please let me know. Thanks!

Edit: I think that my best bet is to reinstall, but I can't find how to uninstall it.

What USB drive are you using? It might be an incompatible one

 

[Sm6413]

Hi! I have a problem with RVLoader. I have it installed and setup, but when I try to play a Wii game it stops at a screen and says, 'FSAccessPatch:93A112FE" after I click on the Wii game icon. Then, it stays on that screen until I restart the Wii. If anyone has any idea what is happening, please let me know. Thanks!

Edit: I think that my best bet is to reinstall, but I can't find how to uninstall it.

I had bad drives do this, try w/ another one

 

[icy_system]

It's a Micro Center 32 gigabyte flash drive (FAT32) that is USB 3 (I'm lucky to have Micro Center by me, it's the best).

Also, I forgot to mention this, but it worked for GameCube games with RVLoader, just not the Wii ones.

I'll try a different drive now and write back if it works.

 

[icy_system]

Tried again with another drive. It's about a gigabyte and I think it's just a generic 2.0 one. I got the same error, but after 1-2 minutes the game LOADED! I'll have to find a bigger drive with more games, but this is good. Thanks Aurelio and Sm6413.

btw RVLoader is great, Aurelio! Its perfect for the Wii portable I'm making.

Also, now that it's set up, how do I exit a game without restarting the Wii?

 

[GameCube4Life]

Hello, is there any way to change Date and Time on RVLoader? I did it on the Wii side and it does not change the RVLoader date and time. Please help friends.

icy_system, from the GitHub

-Implemented Return-To-Loader combo in Hiidra (Z+R+B+Down). Currently only works if using at least one of the RVLHUD compatible boards

 

[icy_system]

Hello, is there any way to change Date and Time on RVLoader? I did it on the Wii side and it does not change the RVLoader date and time. Please help friends.

icy_system, from the GitHub

-Implemented Return-To-Loader combo in Hiidra (Z+R+B+Down). Currently only works if using at least one of the RVLHUD compatible boards

Thanks, GameCube4Life! I looked through the settings, and date/time isn't there. It's probably in the RVLoader config. I'll look more later once I get my controller back together.

 

[GameCube4Life]

Thanks, GameCube4Life! I looked through the settings, and date/time isn't there. It's probably in the RVLoader config. I'll look more later once I get my controller back together.

I hope there is a way, seeing the year 2091 is a little bizarre with the random time. Still working on troubleshooting some of the quirks from my Ashida. Can't get the Classic controller on GC2Wiiremote to work ether.

 

[Finalday917]

So i used a hard drive instead of a USB for this loader and my hard drive just died now my Wii is stuck in the loading screen
Also I can't boot into prii loader cause not either the Wiimote or GCControl works in there
Any solution dude?

 

[GameCube4Life]

Thanks, GameCube4Life! I looked through the settings, and date/time isn't there. It's probably in the RVLoader config. I'll look more later once I get my controller back together.

Brother, I have found a solution to set the time on my Ashida!! I found a homebrew made by ErikZ on GBATemp called sntp which synchronizes the internal clock through wifi.

 

[icy_system]

Brother, I have found a solution to set the time on my Ashida!! I found a homebrew made by ErikZ on GBATemp called sntp which synchronizes the internal clock through wifi.

Thats great to hear!

 

[Stitches]

So i used a hard drive instead of a USB for this loader and my hard drive just died now my Wii is stuck in the loading screen
Also I can't boot into prii loader cause not either the Wiimote or GCControl works in there
Any solution dude?View attachment 26871

RVLoader boots from USB storage. If the HDD you were using has died, you need to replace it with a new USB storage device and put RVLoader on the new device

 

[Claux]

Hi, i have a problem latter to install RVLoader, i can´t start the game, my WiiMote dont connect when opening the game

 

[Viilmo]

Hi, i have a problem latter to install RVLoader, i can´t start the game, my WiiMote dont connect when opening the game

Press 1 when hovering over the game and enable bluetooth

 

[Claux]

Press 1 when hovering over the game and enable bluetooth

You are the Best Thanks!

 

[blKliZrd]

Hey guys im getting the same message another user posted. I built my Ashida, wired the PMS PD to the CM1 but im getting that error message. Using a SansDisk low profile thumbdrive with RV Loader. That may be the issue. Gonna replace it with a 128 Samsung 3.1 fit. If anyone has any other ideas let me know. Added a quick shot of my nightmarish wiring. …also im new at modding and may have made 100 other errors. Thanks

 

[Tantalus2102]

Gonna replace it with a 128 Samsung 3.1 fit.

Be careful - A Samsung Fit Plus isn't actually small enough to fit in the PMS-PD 2 (though I did get it working with RVLoader). I tried, but had to switch to the SanDisk you're currently using and everything worked for me. I would check your wiring on D+/- before putting RVLoader on a new drive.

 

[Stitches]

Hey guys im getting the same message another user posted. I built my Ashida, wired the PMS PD to the CM1 but im getting that error message. Using a SansDisk low profile thumbdrive with RV Loader. That may be the issue. Gonna replace it with a 128 Samsung 3.1 fit. If anyone has any other ideas let me know. Added a quick shot of my nightmarish wiring. …also im new at modding and may have made 100 other errors. Thanks

It was working pre-trim, yes?

 

[blKliZrd]

It was working pre-trim, yes?

Yes! The wii was modded to rv loader to make the USB just before the trim.

LONG PART OF THE STORY
I almost had it working in the ashida case, i was able to charge and read usb through usb-c port to computer. i was mistakenly trying to wire both both cm1 and cm2 off the data + - I pulled the extras and got to a rv loader screen
… took everything apart to remove the extra wires. Putting it back i screwed up and started to put a battery in backward. Saw a fire pop. Reran power lines and got new batteries.

OK LONG (and a bit shameful) STORY DONE.

So i was happy to get back where i had been but couldn’t get the rv loader screen to come back.
That’s when I posted. But I now realize I can’t plug it on to a computer and see the USB anymore either. So… i may have done some damage. I’ll try to order another PMS PD when they are available. Hopefully didn’t fry the main board (getting good power readings from it). That one’s a bit pricier.