Question How to keep case buttons in same place

Discussion in 'Wii' started by themasterofstuf, Oct 21, 2019.

  1. themasterofstuf .

    Joined:
    Mar 27, 2019
    Messages:
    40
    Likes Received:
    0
    My wii case uses the Abxy buttons from the Nintendo switch controllers and the letters keep rotating so I was wondering what is your he best way to keep them in place
     
  2. Nexus_Blue .

    Joined:
    May 12, 2019
    Messages:
    11
    Likes Received:
    1
    Location:
    Earth
    I mean you could probably try gluing the buttons to the abxy tact switches. That’s the simplest idea I got.
     
  3. Nicholas298 .

    Joined:
    Sep 8, 2019
    Messages:
    17
    Likes Received:
    17
    Location:
    Louisiana
    Portables:
    0
    Order Joycon housings and Frankencase the cutouts for ABXY
     
  4. jefflongo Broke BitBuilt Staff Member . .

    Joined:
    Dec 15, 2016
    Messages:
    769
    Likes Received:
    1,033
    Location:
    Ventura, CA
    Portables:
    1
    Gluing the button to the tact switch may or may not work depending on the switch. If it's the orange squishy ones, that could be fine. If it's a standard black tact switch, that wouldn't work because the switch rotates.

    Also as mentioned above, the second solution is to use a joycon housing and frankencase it into your enclosure.

    Third option would be to use a 3d printed case which has the orientation blockers built in. Personally I'd go that way, but I don't know how you're building your case.
     
    cheese likes this.

Share This Page

Loading...