Gamecube with Wasp

Bakuku

.
Joined
Jul 23, 2016
Messages
211
Likes
115
Location
Genk
Portables
4
Somebody asked me to mod his GameCube system for him with a Wasp Fusion modchip.

Thought I'd share it with you guys.

The Wasp is installed in such a way that if you would open the unit you can disconnect the modchip easily from the FFC cable. All pins and power and ground go thru the FFC. Pin 23 goes to the original disk lid switch meaning if you open the disk cover with the button on top of the GameCube the GameCube will tell you to insert a disk.

The diskdrive assembly remains intact and its own plug is covered with electricaltape to make sure it doesn't get power, ground and any other data signal input. So no double signals. This also means that if you were to disconnect the Wasp, remove diskdrive assembly plug tape and reconnect the little molex connector to the disklid switch the unit will function as normal!

Enjoy
 

Attachments

Joined
Sep 29, 2016
Messages
17
Likes
15
Location
The Netherlands
Just wanted to ask, did you get your wasps from your own stock, or do you have a secret supplier?

Loved the micro SD integration on your latest portable btw.
 

Bakuku

.
Joined
Jul 23, 2016
Messages
211
Likes
115
Location
Genk
Portables
4
Just wanted to ask, did you get your wasps from your own stock, or do you have a secret supplier?

Loved the micro SD integration on your latest portable btw.

Just wanted to ask, did you get your wasps from your own stock, or do you have a secret supplier?

Loved the micro SD integration on your latest portable btw.
It's from my own personal stock I got from AliExpress.

And thank you.
 

Stitches

2 and a Half Dollarydoos
Staff member
.
.
Joined
Feb 5, 2017
Messages
1,533
Likes
1,334
Location
Banana Bender Land, Australia
Portables
6
Oh bugger.... RIP portable Gamecubes
 
Top