I've had the pleasure of my G-Boy turning on a couple of times. But so far I've just got one Mario Kart race and one F-Zero race done. After ever time I've used it, something came loose. Which I know has to do with my sub optimal soldering skills. I've fixed the controls that came loose and I've attached the the composite video to the C57 line instead of the capacitor (because it came loose twice) and added some hot glue there. The only "cable" that came loose multiple times is the USB data lines. This morning I've re-soldered them for the Xth time, but now my G-Boy won't turn on.
I've tried turning it on with the charger cable attached: No luck
I've measured connection between the ground USB PCB and PMS PCD: They are connected
I've measured the charger pad: 9V
I've measured the batteries: Both at 2.9V at the moment
Except for the charger pad and the B+, there are no voltage readings on the PMS pads.
The LED is off.
What can I do to find and hopefully fix the problem?
I've tried turning it on with the charger cable attached: No luck
I've measured connection between the ground USB PCB and PMS PCD: They are connected
I've measured the charger pad: 9V
I've measured the batteries: Both at 2.9V at the moment
Except for the charger pad and the B+, there are no voltage readings on the PMS pads.
The LED is off.
What can I do to find and hopefully fix the problem?