- Joined
- Jul 20, 2023
- Messages
- 17
- Likes
- 5
Okay sounds good I'll try it, thanks!Try wiring composite and make sure your u10 is solid. Also make sure to clean near the scw and sdw pads on the pms and everything else in general.
Okay sounds good I'll try it, thanks!Try wiring composite and make sure your u10 is solid. Also make sure to clean near the scw and sdw pads on the pms and everything else in general.
Did you relocate the RTC battery?So update! I now have a working and fully functional Ashida, fan, LED, audio, video, bluetooth, MX chip and buttons are all working wonderfully and it boots consistently everytime. I did end up wiring the audio lines over the wii because I could not route them away from the voltage lines the other way to get rid of the interference but its fine. I am stoked.
The last problem I am having is I do not know how to set the RTC. Whenver I try to boot into the wii system home menu, I can get a wiimote to sync up, and I hear the wii home menu theme but no video comes out. I thought maybe I could change a setting in Priiloader but the system menu hacks wont load, keeps giving me a "cant find hacks_hash.ini" error. I also cant find any homebrew to set the RTC that would work without wifi so I am at a bit of a loss about that. And everytime I boot the thing I need to recalibrate my left stick because it wont go to the left
I'm afraid I don't know how either. Settings Editor GUI lets you change almost everything, but the system clock isn't on its function listI did! I just dont know how to set it without getting to the wii home menu lol
ooo that's a good call, okay I will try that! thanks!Wire up composite to the screen and temporarily disconnect mode from 3v3, switch the screen to AV and then go to the home menu. Set the time, then you can undo the composite wiring and reconnect mode to 3v3.
So update! I now have a working and fully functional Ashida, fan, LED, audio, video, bluetooth, MX chip and buttons are all working wonderfully and it boots consistently everytime.