Worklog Wiiu gamepad wii first projet

[Frenchiewii]

Hello
This is my projet. I works slowly at this
Soiry for my english ;-)

I works to the rear , i wantmake a 3d box with my printer 3d for the fan and battry

 

[Frenchiewii]

Hello
This is projet today

 

[xsping]

This is same thing i am working on

 

[adventchildmatrix]

hahaha must be something in the air, i just bought a wii U gamepad shell to do a similar project

 

[StonedEdge]

I would highly advise against mounting the Wii motherboard with hot glue. You'd be much better off frankencasing in some 3D printed screwposts at absolute minimum. The glue is just going to melt under the temperatures of the Wii, and then reharden in places you don't want it to causing potential shorts and other complications with other circuitry.

 

[jeffery]

also, why are u using a 6 layer wii which produces much too much heat that and the hot glue will for sure do what stonedEdge said I have had glue melt in a 4layer

 

[Frenchiewii]

Ok i change to epoxy glue

 

[Frenchiewii]

I just 6 layer in my possession

 

[adventchildmatrix]

Firstly don't double post, there is an edit button for a reason.

Ok i change to epoxy glue

good god thats an even worse idea, especially if you need to rearrange anything (which you almost certainly will), you obviously have access to a 3D printer, Print some mounts for the boards and other components and epoxy the mounts to the case (once you've finalised positions for everything) and then screw the wii board ect into the mounts

 

[Frenchiewii]

The bouton of wiiu gamepad piste

 

[Frenchiewii]

 

[Frenchiewii]

hello
to day i test my wii projet for the first time.
i not working :-(
i cut the u10 trace and relocalise the U10 on the U5
i install bbloader
i install a power regulator 3,3v 1,15 and 1v
i bridge 1,8v on the wii motherboard

And no signal

Can you help me for boot the motherboard

6 Layer

thank you

 

[Frenchiewii]

U10 trace cut aftet the photo
On this photo not cuting

 

[Frenchiewii]

I think my bbloader is not correctly installed
I not wifi connected , if my bbloader is not configured on no wifi , the board boot ??
My board is connect to av signal , it is correct or the vga signal to do connected ???
Sorry for my english

 

[sandman7793]

Pretty sure bbloader needed installed and verified working, before the trim. Once trimmed is to late.

 

[Earlydiygamer]

im trying to do the same project and im trying to get all the preparations such as installing the software and games into the wii but i cant figure out where i am supposed to put the iso's and folders, and i think it is still possible to put the bbloader in if you can connect a usb

 

[guyman70718]

hello
to day i test my wii projet for the first time.
i not working :-(
i cut the u10 trace and relocalise the U10 on the U5
i install bbloader
i install a power regulator 3,3v 1,15 and 1v
i bridge 1,8v on the wii motherboard

And no signal

Can you help me for boot the motherboard

6 Layer

thank you

did you sand the motherboard?

 

[Frenchiewii]

Yes i works

I post video her

This is my projet 90% terminat


MOD EDIT - Edit your post, don't double/triple post. English only.

 

[Frenchiewii]

 

[Frenchiewii]