Question Help with burned pads

[GaLoooL]

Hi there!

I want start with a simple GBM mod...

I bought a DS Lite with top screen Broken (for pieces) because i see that i really dont need the top screen for GBM mod.

When i get It i just try to power up but it doesnt turn on and i see that fuse P1 was burned so i just replace it and now works.

After that i go to weild the resistor too for made the GBM real but... Of course the former owner burned both gold pad (LEDA2 and LEDC2)... so i just want to cry at this point...

Is possible put the resistor in other pads? Or are these pads located in another area to continue with this process?

 

[jefflongo]

I would start with posting a picture.

 

[GaLoooL]

This is the situation, both path are burned and next to it is like grated.

i dont know if is possible fix that or put the resistor on other pads.

thanks

 

[tanakorn]

View attachment 22493

This is the situation, both path are burned and next to it is like grated.

i dont know if is possible fix that or put the resistor on other pads.

thanks

Connect the resistors at these 2 points. Let's see first. in case your board is not broken (sorry my english is not good)