No problem, I'm actually doing a g-boy so if you have more question, I can help you 
G-Boy PCB Files?
- Thread starter Dustin Fisher
- Start date
Look at this thread:
yqwsyxl driver board | BitBuilt - Giving Life to Old Consoles
yqwsyxl driver board | BitBuilt - Giving Life to Old Consoles
- Joined
- Jun 21, 2021
- Messages
- 11
- Likes
- 0
What should I print at this point?
I recommend you to use the case from @flux_sniffer,I personnaly used it for mine and I really love it,especially the litte interruptor on the top of the console.The files are on the third page of this thread
- Joined
- Jun 21, 2021
- Messages
- 11
- Likes
- 0
so the case from flux sniffer, and the gboy files zip from Dustin?
Yep that's it
- Joined
- Jun 21, 2021
- Messages
- 11
- Likes
- 0
also is the rvl pms 2/lite compatible?
Yes,the case was made for 4layertech's board,so it's definitly compatible with the gc+2,the pms2/lite,the pms-pd 3 and the uamp
Edit:
But actually,if you want to build something similar,with less wires(actually none lol) and more modern,I would recommend you to check @Xenii Xii boy ultr,and,if you're a little patient,you can also wait for his kits to launch
Edit:
But actually,if you want to build something similar,with less wires(actually none lol) and more modern,I would recommend you to check @Xenii Xii boy ultr,and,if you're a little patient,you can also wait for his kits to launch
Last edited:
- Joined
- Jun 21, 2021
- Messages
- 11
- Likes
- 0
Sorry but (hopefully) one more thing, I find the BOM VERY vague, and the only thing without a link a know to buy are two dual tacts from flashfi.re. does anyone have their bom when building their rev4U?
Yeah it's pretty large,I didn't made one but here is the link lf the buttons.
flashfi.re
And also,be careful,the bom is old and you need to check others things,I highly recommend you to check this thread where @CrazyGadget put links for all the wrong parts.
Flashfi.re
TMHF07 Dual-Action Tactile Switch. Perfect for simulating GameCube analog + digital triggers in Wii portables. 6.2 x 6.5 x 3.8 mm White plastic actuator
flashfi.re
And also,be careful,the bom is old and you need to check others things,I highly recommend you to check this thread where @CrazyGadget put links for all the wrong parts.
Hello all! I'm super excited to finally start working on a portable Wii! 
I got inspired 2 years ago after watching LTT's video on the G-Boy. Now that I finally have a disposable income and an unsuspecting Wii, I can start on this project! Unfortunately, after rediscovering the G-Boy Kits and learning about their lack of stock, I was saddened. Luckily not all was lost. I learned about 4LayerTech, the amazing build guides from the likes of Ginger/Shank/Gman, and the modifications @Dustin Fisher made to the original PCBs and STLs. I now have a path forward to bring a G-Boy to life...
I got inspired 2 years ago after watching LTT's video on the G-Boy. Now that I finally have a disposable income and an unsuspecting Wii, I can start on this project! Unfortunately, after rediscovering the G-Boy Kits and learning about their lack of stock, I was saddened. Luckily not all was lost. I learned about 4LayerTech, the amazing build guides from the likes of Ginger/Shank/Gman, and the modifications @Dustin Fisher made to the original PCBs and STLs. I now have a path forward to bring a G-Boy to life...
- Joined
- Jun 21, 2021
- Messages
- 11
- Likes
- 0
- Joined
- Jun 21, 2021
- Messages
- 11
- Likes
- 0
It's probably time I contribute to this thread, so I made a custom start button with a plus for bambu printers.
- Joined
- Jun 21, 2021
- Messages
- 11
- Likes
- 0
This is from the file I sent.
That's the right form factor LCD panel, but that driver board is HDMI only. You want to find a set with a VGA compatible driver board
- Joined
- Jun 21, 2021
- Messages
- 11
- Likes
- 0
yeah ima go DD
Ah, that's fine then
