Ashida Wii Portable

Stitches said:
In the first post there are links to download the case files
Click to expand...

I checked and ran into two problems, one is to change the file format but if I do, it says it'll become unusable. That means change from .RAR to .OBJ or something else.

The next problem is the file limit, I understand that the Ashida case is huge, but I need to find a way to make it into two parts. The file limit is at <50MB, I want to get the case so that I can buy the parts. I tried looking for different methods and no luck. Could you help me out?
 
Tak00 said:
I checked and ran into two problems, one is to change the file format but if I do, it says it'll become unusable. That means change from .RAR to .OBJ or something else.

The next problem is the file limit, I understand that the Ashida case is huge, but I need to find a way to make it into two parts. The file limit is at <50MB, I want to get the case so that I can buy the parts. I tried looking for different methods and no luck. Could you help me out?
Click to expand...
A RAR file is an archive format. You'll need to extract it using a program like 7-zip or WinRAR, and then you'll end up with a folder with all the case files in it.
 
1668811349596.png


PLEASE READ THE FIRST POST THOROUGHLY
 
Last edited:
MP3 said:
A RAR file is an archive format. You'll need to extract it using a program like 7-zip or WinRAR, and then you'll end up with a folder with all the case files in it.
Click to expand...

Good news, I got the files.

Bad news, when I choose the file, it says "File Extension Error"

Screenshot_20221118_050115.png


Tak00 said:
Good news, I got the files.

Bad news, when I choose the file, it says "File Extension Error"

Screenshot_20221118_050115.png
Click to expand...

Nevermind, I'm dumb. I tested and it worked.
 
Are the threads on the 3d print sufficient for the screws. I’m thinking of putting in metal threaded inserts in the print, would I be able to just put threaded inserts in the threaded areas of the model as is or would the model need to be modified(screw posts widened) to allow for the size of the insert. Just concerned of just straight screwing in the print.
i guess another option would be to get smaller screws with smaller threaded inserts that would fit the screw posts
 
S1234P said:
Are the threads on the 3d print sufficient for the screws. I’m thinking of putting in metal threaded inserts in the print, would I be able to just put threaded inserts in the threaded areas of the model as is or would the model need to be modified(screw posts widened) to allow for the size of the insert. Just concerned of just straight screwing in the print.
i guess another option would be to get smaller screws with smaller threaded inserts that would fit the screw posts
Click to expand...
It's designed for direct screwing into the case, FDM prints can take a considerable amount of screwing/unscrewing before failure. Resin prints aren't as forgiving but plenty of others have built the Ashida without threaded inserts.
 
Wesk said:
It's designed for direct screwing into the case, FDM prints can take a considerable amount of screwing/unscrewing before failure. Resin prints aren't as forgiving but plenty of others have built the Ashida without threaded inserts.
Click to expand...
Alright thanks, just curious.
 
So I know you said that you figured out your file problem, but id thought that I’d put this out there. This site is good for extracting since it can do most archaived files, it’s easy to use (just upload the file or the file link) and it’s free. If this was a dumb post, just tell me and I’ll take it down. But this is something I use and it’s work every time (but you probably don’t care)
 
Fuzzy_Melk said:
So I know you said that you figured out your file problem, but id thought that I’d put this out there. This site is good for extracting since it can do most archaived files, it’s easy to use (just upload the file or the file link) and it’s free. If this was a dumb post, just tell me and I’ll take it down. But this is something I use and it’s work every time (but you probably don’t care)
Click to expand...
It's not really dumb, some people aren't able to install or run external programs on their systems. This would be useful for them
 
I was thinking about getting a screen protector for the 5inch 16:9 ips screen, cause of the size and product it’s very difficult to find one, can anyone help me with this.
Most likely thinking if I can’t find a temped glass screen protector i might get those plastic films and just cut it myself.
 
Last edited:
Hey everyone, is the PCB set going to be available again soon? It says its out of stock :(
 
Sully_:0) said:
Thank you! I actually sent a message to 4 layer technologies and quote " We have plenty, sorry I didnt realize the inventory number went to 0. " haha so we good
Click to expand...
small business moment
 
S1234P said:
I was thinking about getting a screen protector for the 5inch 16:9 ips screen, cause of the size and product it’s very difficult to find one, can anyone help me with this.
Most likely thinking if I can’t find a temped glass screen protector i might get those plastic films and just cut it myself.
Click to expand...
I've never managed to find one. I think taking a slide chop to a larger plastic film one is the game plan
 
Question, right now I got the 3D models to pcbway and it's under review, how long does it take to review?
 
ttabbal said:

Toward the bottom of the page is the info for the wifi relocation. I'm not bothering at the moment, but it should be possible to get it in there. If you have the modified firmware, I guess it's not required.
Click to expand...
Heres my plan.

Somehow get wifi working,
somehow find and add a wasp fusion to retain a faux "disk drive"
install CTGP (Mario kart custom track client which requires you have a Mario kart wii disc inserted)
play online and be able to upload time trial ghosts on the CTGP database

easy right? haha
 
You must log in or register to reply here.

Similar threads

Ashida Wii Portable
Replies
0
Views
2K
bobc1674
David w Davis
Ashida wii portable
Replies
3
Views
4K
Debbie
Debbie
Question Ashida Wii Portable 3d Printer
Replies
3
Views
488
Snakeeater
Dozzi
Ashida Wii Portable
Replies
4
Views
5K
CrazyGadget
CrazyGadget
YT N9-Volt
Question What awg size wire do I need for the Ashida Wii Portable speakers?
Replies
1
Views
156
YT N9-Volt
YT N9-Volt
Back
Top