wii

Hello there. I registered just a moment ago. So, I bought a Wii to try OMGWTF on and will most likely turn it into a portable and some kind of dock with GC ports and stuff. Main goal here is ability to play GC games, but I'm planning to keep BT and wifi. Progress so far consists of a succesful...

Hi BitBuilt I'm currently working on my first Nintendo Wii portable. I've been interested in portablizing a system for a long time but never had the tools, or the understanding, on how everything works. Recently a good friend of mine @Jefflongo.724 built his beautiful Wii portable that inspired...

I'm happy that I've finished my portable, but I'm not a huge fan of taking it to smash tournaments. For this reason I've decided to make a Wii micro (inspired by @Gman ). This build will have the following features Trimmed Wii motherboard (retaining the USB and AV out port on the board) Powered...

Name is a wip. Been a lurker for couple of weeks now and i been pretty stoked to make my own portable. I been pretty obsessed with the switch's tabletop mode, so i wanted to make a tabletop wii portable. This means no controller on the actual system itself, instead using external gamecube...

I get wavy, faint, diagonal lines that run across the screen when the wii is on. When it turn the wii off but keep the display on there’s no lines. I tried using a shielded composite cable but i still get these stupid lines. Has anyone else dealt with these? Thanks

So in the attempt to portabilitize a Wii I had purchased at an auction, I ended up in a situation where my Wii refuses to show an indicator light when power is applied to it. I tried replacing the big grey power brick, but that didn’t do it, and I think it is a problem with the motherboard...

IT IS FINISHED! Took phekkin long enough, but it's finally done. Huge thanks to Aurelio for saving my ass on several occasions. The Liinx features: A modified Atari Lynx 2 case Official Gamecube buttons and sticks with bootleg PS1 controller dual tact triggers A GC+ from the BitBuilt store...

So I'm trying my hand a portable wii. Heres the goal list: Thinner than the original wii Tablet form factor (with a stand) No disk drive (USB Games) Sensor Bar compatibility w/ original wiimote All 4 gamecube ports and 1 Gamecube card slot Headphone Jack Large, loud stereo speakers Big screen...

Ey B0is. The plan: -internal gc controller -wifi -frankencase (laptop 'cause they're awesome) -usb slots -sd card slot (mostly for brawl mods\ctgpr) -bluetooth -pth08080 regulator system -one of those 50/50 on actually working on arrival cheap chinese screens (mine works) -4 18650s -internal...

I've been putting off posting this thread because I wanted to make sure there were no issues before I say it's done. After a lot of closing the case and reopening it, all the issues are ironed out. It's done. Worklog Features OMGWTF trimmed Wii motherboard Custom 3D printed case 7.4v 6800mAh...

Yo wuss poppin. For my portable gc, I made a 14.8v. Battery pack with those amazing ncr18650 batteries (cancelled because wii is infinitely better) I used a tenergy smart charger and their 32010 protection circuit for a 14.8v pack. Now that I need to use a custom regulator, I want to make a...

hi seems tho Calling all noobs (noob question thread) is closed . i wanted to ask with the Wii Portable could it fit in a 3ds xl case ? wanted to make one but the more i look at it the more i think not . the only 2 things i think stop it is 1) heatsink +fan and 2) battery size maybe . am sure...

.

Is it possible to dremel off one of the two ports for the GameCube cards on the board and keep only one? Want to make the wii board pretty flat while keeping many of the ports Thanks

So I’ve officially decided to make a work log of my wii, rather than just going for it simply because this is my 4th portable attempt, and the first time I intend to not rush the project. I’m starting off with a wii with PortablizeMii installed, as well as the U10 relocation already performed...

Hi my project is somewhat questionnable because there is no real benefit in doing so but I am doing it anyway so here it goes: I'm making a custum wooden case for the Wii without trimming the board, only removing the disc drive and I want to include the psu in the case. I'm also going to...

So, Doing' a re haul, I'm not using the dmg concept anymore, because i'm using it for the Kuesa, which seems like a better fit for the Concept/layout. While Waiting for Stuff for the Kuesa, I've been working on this boi(this might even become my Submission because I have more stuff for it than...

I am completely inexperienced working with batteries and making them, I want to be as cheap as possible with my Wii Portable build, and have a relatively small battery pack. If someone who knows more about this could help me out, It'd be very appreciated. What I need to know: What's the most...

Hello everyone, I was wondering if any of you have a handheld (not laptop) wii for sale. If so, could you let me know what is features and your asking price? Thanks

Hi for start lets say what i use i have soleering iron blablabla for moding and then from ebay i buy wii motherboard for 15 dollars so why not and i see how it can be trimmed diwn but is there any scheme if i desolder anything to make new pcb where it will be capable of wifi bluetooth and...