wii

So while I wait for my soldering heat gun to work(waiting for a replacement that works .-. ), and since I'm out of money, I decided to give my idle hands work, and I took a shot at Frankencasing. It sucks, But It's finally done the case work for the most part(just need to make port holes). I'm...

When I tried downloading the cheese to my wii it said FAT error and No USB detected. I tried reformatting it and now it just says exFAT with 32k. I used a program that said it would format it to FAT32 but it still says exFAT when my computer reads it.

Anyone willing to sell a trimmed board? If so pm me!

Ive been doing research on just the hardware and several links ive found from Shank and other top members. Ive gotten somewhat of an understanding on how motherboards and the hardware work and i know how to solder and simple circuitry . Im just lost right now since i dont know where to start in...

I am planning to build a wii portable (worklog coming soon), and after lurking around and reading for a while, i think i pretty much know the work flow of building one, and the shopping list is pretty much complete. It seems that 4 layer board are the optimal choice for portables, but those are...

I have been looking for many screens that fit the 5v ratio for my portable Wii, but.... The screen I have in mind fits the 480p resolution, but the voltage is always 12v None of them at at least 4inches! Also, I read about using RasberryPi screens. So I won't use them. Or is there a way to...

Hey BB! @Postman and I have been hard at work in the Mod Station cooking up new memes for all the goodbois! This one is a twist on a twist on hotdogs. :rothink: I found a Raspberry Pi case online that looks like a mini GC, someone then modified it for a SBC to emulate GC. The modified version...

Hello. I recently picked up a GameCube compatible black Wii to use with my new CRT. I wanted to play some DVDs on it as I have nothing else to use that has component hookups (using homebrew software, obviously). But, apparently, my Wii has a newer revision of the disc drive that doesn't support...

I recently installed portablizeMii on my Wii. The disc drive does not work, and when it goes portable it won't have it anyways.. I have gotten GC games to load (MK DD, Bomberman, etc) and before I start hardware mods I just need to be able to play Wii games. What homebrew app and file...

So Yesterday, I had the whole day to work on cad, dangerous thing, I know; Here's the features. Estimated Size: 143.00 mm x 76.00 mm x 24.00 mm (Smaller than the piiwii which is 143.00 mm x 82.55 mm x 35mm), Still the same width, but smaller by thickness and height. [Might be second smallest...

My plan is to make a Wii portable in a small Toshiba portable DVD player chassis I have. Since the original screen was 480x234, the composite input on it looked like trash, and I had to upgrade. I ordered a new LCD yesterday. It's the same size (9") but is 800x480 instead, and has a VGA input...

(I try to search through the forums before I ask questions.) 1.) I want to attempt the AVE relocation but I can't find if someone has done a guide. Also if it;s to do untrimmed with the another AVE still attached. 2.) As far as I know the LDO I bridge pins 1-2 for 3.3v, 3...

Hey everyone, here I am again. This time I tried to do everything there was to do. I bought and wired the PTH08080, checked voltages and trimmer a bit out the lines. When I power it up the screen is black and it's like it's resetting every half a second. The only thing I didn't try is to adjust...

I started my Portable Wii project about a year ago and managed to do the OMGWTF-trim successfully, but I never finished the project. Now I was thinking of reviving the project and today on the bus, I got to think , if it could be possible to design a custom motherboard and transplant the...

Hi, I'm nitroboy on discord so I decided to make a worklog : This minigcwii will entirely be in that case Which I think is pretty small, see the wii2hdmi as a reference. Features: - Bluetooth [✓] - Hdmi output [✓] - Composite output in a headphone jack [ ] - Mx chip, without battery [ ] - IR...

My first portable Wii is called the Wii-cycled. But before all that, I would like to thank you all for the experience and knowledge you have shared on this site without which I wouldn't have been able to create such a device. Now to the console It is not particularly special...

Trimming a motherboard is generally the most daunting part of any portable. It's scary, there's no way around that. The goals of this long list are to help people feel more comfortable with the idea of trimming, preemptively answer a lot of questions people may have about trimming, and help...

Hi everyone, after I broke my only 4 layer board, I decided to go forward and trim a 6 layer one. After testing that everything was working with the regulators and installing PortablizeMii, I decided to trim it. And to my surprise, it was working. But after working for 2 times, it died. The CPU...

This is my first time posting sorry for anything wrong. I trimmed my 6 layer Wii and relocated the U9 chip because my U10 broke. The 1.15v, 1v and 1.8v lines are all reading as continuous to ground. 3.3v is not reading as continuous but has low resistance. What do I do to fix this. The gray...

My first post in the cutting edge and boy does it feel good. The quest of a year and a half of trying to build a working Wii portable finally came to a close when I screwed this guy shut a couple hours ago. Meet your Waker: I am so happy with how this turned out. It works, it's super...