wii

So I was wiring up the 3v lines to the bluetooth module and I accidentally hit the ground pin of my power switch (soldered to the board ground) with the end of one of the wires because I'm dumb and wasn't being careful and paying attention. Saw and heard a spark and now the board wont boot. The...

Okay so I’m on my second Wii now (I accidentally fried my first one), and I’ve run into some trouble. I opted not to trim my Wii because I’m not very experienced with that type of stuff. So on to the problem: I soldered the “ground” and “composite” wires from the Wii to the “AV2” and “ground”...

Hey everybody! Today I will be selling some of my stuff that I might not use, since I don't need the pth08080s and instead I'm getting a powermii lite, if they are available I suppose :) Well then let's get onto it shall wii! 1. Regulators I'm not sure if these are the right resistance but I'm...

(within reason) I've got a 4-layer board on the way, and I want to make something out of the ordinary. Initial thought: Pi Zero mini-terminal + Wii portable Wrap 'em in a 3DS XL case with a keyboard on the bottom half ( a la @Luke ). But I want to hear more!

As the title implies, I've got no rumble in my cube controller after a trim on a 4 layer board. The rumble worked before the trim and the controller is getting 5 volts so I'm not really sure what's going on here. The trim works fine as well (obviously). I have a wasp fusion installed on a cube...

I have worked on this project for 4 months now. I'm done. I have a video. The first 2 minutes upon startup the screen goes crazy. No idea how to fix that, but games play fine. Inside is a mess. Fin.

Nobble is building a hybrid portable. Mainly Wii based, but with a berry good twist CURRENT STATUS waiting on the OMGWTF Trim from SS *SHIPPING! SHIPPED! waiting for my L7009 7.0" TFT LCD to arrive! SHIPPED! need to find suitable batteries for cheap and will last long. PANASONIC...

okay, so I've been following along with the wii trimming guide (except for the trimming part), but when I tried soldering the video wires straight to the wii motherboard there was no video output. The screen didn't even recieve a signal! Here are some pictures (above)

Hello, I really want to start with my wii portable and i have almost all of the parts now (wii, cpu-50) GC+ (thanks, Aurelio!) and screen, batteries, regulators, basically everything. But the wii i got was secondhand (obviously) and the previous owner modded it at 4.1e and then formatted it. The...

okay so I've got a speaker that I salvaged from an old Walkie-talkie and I was wondering where I would solder the speaker onto the wii for my portable project.

so I've started a portable wii porject and I have a 12v 6000mAh DC battery pack that I'm going to use, and I was wondering if anyone knows of a good AC to DC converter for my portable Wii project.

So imagine you have yourself a portable Wii with a built in GC controller. BUT, you retain the stock cable for the controller, and it plugs into the console. (This would basically be if you used a GC keyboard controller shell for the whole system). In this manner, you could plug your portable...

Since the PTH regulators can be purchased for a significantly reduced price when bought in bulk, I figure that it would be somewhat profitable and cheaper. I would love to see this get put into action, though it may not happen.

So as you guys know, I'm working on a wii portable that is going to look like a larger version of a ds lite. I paint and customize consoles in my spare time, and I'd like to bring that into my portable. So, I want to try and find a "theme" that fits my portable. Does anybody have any ideas? I'd...

So you are making a portable and everything is going well. Half way through you decide that you want the ability to have multiple controllers connect to your portable; oh no, you don't have any more room but for one extra port because you didn't plan it out in the beginning. Or perhaps you made...

I have a question that I have wondered for along time, should I take off these parts? Or can I just take it off with pliers? Thanks

Hi, how do I take out the GameCube ports when I am trimming? Is it really necessary to take it out when I do the OMGWTF trim for my 6 layer board? Thanks

Jesus! I had no idea that cutting the motherboard was going to be so difficult! I have a 6-layer board and I initially thought it'd be a cakewalk... I was wrong. My dremel veered off course occasionally and I managed to knock off a couple components. My question is, what can I do to possibly get...

I trimmed my wii(6layer) but now it won't power on plz help.could this likely be caused by not sanding with the right grit? Or did I just cut something important? Unless I have to if rather not do the omgwtf trim. This trim will fit fine in my case.

Hey friends, I've played Melee with ShockSlayer for years now and we decided we wanted to bring it to BitBuilt, potentially with a future in holding competitions, regular friendlies, etc. For those of you familiar with competitive Melee already, I use Smash Ladder for netplay practice. A...