PS2 Ultra Slim

Does anyone have a stl file for the bottom shell without the sd card slot and switch slot

I just took Wesk's original STEP and removed the MX4SIO part for ya, see if that works.

1794778652955.webp
 

Attachments

This is such a clean design — hard to believe there's a full PS2 inside something this small. Love seeing people share modified STLs here too, that's what makes this community great.
 
So I started disassembling my ps2 slim 79001 and I do not have a lid detection switch on the motherboard, so will I not be able to do this mod
 
So I started disassembling my ps2 slim 79001 and I do not have a lid detection switch on the motherboard, so will I not be able to do this mod
This is not an issue. You have probably have a GH-062-xx? Can you send a pic or share the board model?

Look through these posts, should help you.


 
Last edited:
This is not an issue. You have probably have a GH-062-xx? Can you send a pic or share the board model?

Look through these posts, should help you.


It is a GH-62-02
 
Just sifting through some posts trying to find a few examples. I have some boards taht I have made but I know that does not help you. I am working on a store to make my mods available, but not yet.

You can use the switch board (SW Board).

1794880619049.webp
1794880649894.webp
 
Last edited:
Just sifting through some posts trying to find a few examples. I have some boards taht I have made but I know that does not help you. I am working on a store to make my mods available, but not yet.

You can use the switch board (SW Board).
Yeah I've never soldered before and this is a project that I've been wanting to do it just took a bit finding a ps2 that would work and wasnt an arm and a leg, but you have been very helpful and I appreciate it
 
Back
Top