Worklog Wifi Breakout Board for Relocation

[MJMT]

I didn't see anyone post anything like this here. I just sent these off for fabrication. I know most people just eliminate it but I wanted to do this for a while now.

 

[MJMT]

So..... That connector doesn't work. it is slightly too wide for the wifi connector.

Edit: https://www.digikey.com/en/products/detail/molex/0529910208/1059850 looks like it might be an exact match and I should be able to solder them on with no modifications since the pitch is the same. I'll just make minor tweaks to the board after I have 1 finished.

 

[CalebPikmin]

I'm interested in this! Very cool.

 

[MJMT]

ETA May 12th on the NEW parts. I'll share the PCB design if everything works out well.

 

[SparkleBear]

That’s really nice man. I’ve definitely been thinking about how cool it would be to wifi share saves between portables.

 

[MJMT]

Here you go. This seems to be good. https://oshpark.com/shared_projects/EAqOtQy3

Connector https://www.mouser.com/ProductDetail/Molex/52991-0208?qs=KC2ywxza1krtfqlg7H04kw== or https://www.digikey.com/en/products/detail/molex/0529910208/1059850